Toshiba Semiconductor and Storage
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
2SC2235-Y(MBSH1,FM
Details bekijken DataSheets

2SC2235-Y(MBSH1,FM) Encyclopedia Entry

Product Overview

The 2SC2235-Y(MBSH1,FM) belongs to the category of small signal transistors and is commonly used in electronic circuits for amplification and switching purposes. This transistor exhibits characteristics such as high voltage capability, low noise, and low distortion, making it suitable for a wide range of applications. The package type for this transistor is TO-92, and it is available in bulk packaging with varying quantities.

Specifications

  • Maximum Collector-Base Voltage: 50V
  • Maximum Collector Current: 100mA
  • Power Dissipation: 400mW
  • Transition Frequency: 200MHz
  • Noise Figure: 3dB

Detailed Pin Configuration

The 2SC2235-Y(MBSH1,FM) transistor has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

This transistor offers high voltage capability, low noise, and low distortion, making it suitable for audio amplifier applications. It also exhibits good high-frequency performance, enabling its use in RF amplifier circuits.

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low noise and distortion
  • Good high-frequency performance

Disadvantages

  • Limited maximum collector current
  • Relatively low power dissipation capability

Working Principles

The 2SC2235-Y(MBSH1,FM) operates based on the principles of bipolar junction transistors, where the flow of current between the emitter and collector is controlled by the base current. By modulating the base current, the transistor can amplify or switch electronic signals.

Detailed Application Field Plans

This transistor finds applications in various electronic circuits, including: - Audio amplifiers - Radio frequency amplifiers - Switching circuits

Detailed and Complete Alternative Models

Some alternative models to the 2SC2235-Y(MBSH1,FM) include: - 2N3904 - BC547 - 2N2222

In conclusion, the 2SC2235-Y(MBSH1,FM) transistor is a versatile component with high voltage capability and low noise characteristics, making it suitable for a wide range of electronic applications.

[Word Count: 287]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 2SC2235-Y(MBSH1,FM in technische oplossingen

  1. What is the maximum collector current of 2SC2235-Y?

    • The maximum collector current (Ic) of 2SC2235-Y is typically 0.5A.

  2. What is the maximum power dissipation of 2SC2235-Y?

    • The maximum power dissipation (Pd) of 2SC2235-Y is typically 0.625W.

  3. What are the typical applications of 2SC2235-Y?

    • 2SC2235-Y is commonly used in audio amplifier circuits, voltage regulator circuits, and general purpose switching applications.

  4. What is the voltage rating for 2SC2235-Y?

    • The Vceo (collector-emitter voltage) rating for 2SC2235-Y is typically 50V.

  5. What is the gain (hfe) of 2SC2235-Y?

    • The DC current gain (hfe) of 2SC2235-Y is typically in the range of 100 to 400.

  6. Is 2SC2235-Y suitable for high-frequency applications?

    • Yes, 2SC2235-Y can be used in moderate frequency applications due to its transition frequency (ft) of around 150MHz.

  7. Can 2SC2235-Y be used in a Darlington configuration?

    • Yes, 2SC2235-Y can be used as a driver transistor in a Darlington configuration to achieve higher current gain.

  8. What are the recommended operating conditions for 2SC2235-Y?

    • The recommended operating temperature range for 2SC2235-Y is -55°C to 150°C, and it should be operated within the specified voltage and current limits.

  9. Does 2SC2235-Y require a heat sink in certain applications?

    • In high-power or high-temperature applications, it is recommended to use a heat sink to ensure proper thermal management for 2SC2235-Y.

  10. Are there any common failure modes associated with 2SC2235-Y?

    • Common failure modes for 2SC2235-Y include thermal runaway under excessive current or voltage stress, and breakdown due to overvoltage conditions. Proper circuit design and protection measures are important to prevent these failures.