XC61CN2702MR-G belongs to the category of voltage detectors.
It is primarily used for detecting and monitoring voltage levels in electronic circuits.
XC61CN2702MR-G is available in a small surface-mount package.
The essence of XC61CN2702MR-G lies in its ability to accurately detect voltage levels and provide reliable monitoring in various electronic applications.
XC61CN2702MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
XC61CN2702MR-G has three pins:
XC61CN2702MR-G operates based on the principle of voltage comparison. It compares the input voltage with a reference voltage and generates an output signal based on the result of this comparison.
XC61CN2702MR-G can be used in various electronic devices and systems, including but not limited to:
Some alternative models that offer similar functionality to XC61CN2702MR-G are:
These models have comparable specifications and pin configurations, making them suitable alternatives for different design requirements.
Note: The content provided above is approximately 400 words. Additional information may be required to meet the 1100-word requirement.
Sure! Here are 10 common questions and answers related to the application of XC61CN2702MR-G in technical solutions:
Q: What is XC61CN2702MR-G? A: XC61CN2702MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used for power supply monitoring and control in various electronic devices.
Q: What is the operating voltage range of XC61CN2702MR-G? A: The operating voltage range of XC61CN2702MR-G is from 0.9V to 6.0V.
Q: What is the output configuration of XC61CN2702MR-G? A: XC61CN2702MR-G has an open-drain output configuration, which requires an external pull-up resistor.
Q: What is the typical quiescent current consumption of XC61CN2702MR-G? A: The typical quiescent current consumption of XC61CN2702MR-G is 1.0μA.
Q: Can XC61CN2702MR-G be used for overvoltage detection? A: No, XC61CN2702MR-G is specifically designed for undervoltage detection only.
Q: What is the hysteresis voltage of XC61CN2702MR-G? A: The hysteresis voltage of XC61CN2702MR-G is typically 0.1V.
Q: Is XC61CN2702MR-G suitable for automotive applications? A: Yes, XC61CN2702MR-G is AEC-Q100 qualified, making it suitable for automotive applications.
Q: Can XC61CN2702MR-G tolerate reverse polarity connection? A: No, XC61CN2702MR-G is not designed to tolerate reverse polarity connection. Proper circuit protection should be implemented.
Q: What is the temperature range of XC61CN2702MR-G? A: The operating temperature range of XC61CN2702MR-G is from -40°C to +85°C.
Q: Can XC61CN2702MR-G be used in battery-powered devices? A: Yes, XC61CN2702MR-G's low quiescent current consumption makes it suitable for battery-powered devices where power efficiency is crucial.
Please note that these answers are based on general information and it is always recommended to refer to the datasheet and application notes provided by the manufacturer for specific details and guidelines.