XC61CN2602MR-G belongs to the category of voltage detectors.
It is primarily used for detecting and monitoring voltage levels in electronic circuits.
XC61CN2602MR-G is available in a small surface-mount package.
The essence of XC61CN2602MR-G lies in its ability to accurately detect voltage levels and provide reliable monitoring in various electronic applications.
XC61CN2602MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
XC61CN2602MR-G has three pins:
XC61CN2602MR-G operates based on a built-in voltage reference and comparator circuit. It compares the input voltage with a preset threshold and generates a digital output signal accordingly. The output signal can be used to trigger further actions or provide feedback in electronic systems.
XC61CN2602MR-G finds applications in various fields, including:
Some alternative models that offer similar functionality to XC61CN2602MR-G are:
These models have comparable specifications and pin configurations, making them suitable alternatives for different design requirements.
Word count: 511 words
Sure! Here are 10 common questions and answers related to the application of XC61CN2602MR-G in technical solutions:
Q: What is XC61CN2602MR-G? A: XC61CN2602MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC61CN2602MR-G? A: The operating voltage range of XC61CN2602MR-G is from 0.65V to 6.0V.
Q: How does XC61CN2602MR-G work? A: XC61CN2602MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage exceeds the reference voltage, the output of the IC changes state.
Q: What is the output configuration of XC61CN2602MR-G? A: XC61CN2602MR-G has an open-drain output configuration, which means it can be connected to other devices through a pull-up resistor.
Q: What is the typical quiescent current consumption of XC61CN2602MR-G? A: The typical quiescent current consumption of XC61CN2602MR-G is around 1.0µA.
Q: Can XC61CN2602MR-G be used for overvoltage protection? A: No, XC61CN2602MR-G is not designed for overvoltage protection. It is primarily used for undervoltage detection.
Q: What is the hysteresis voltage of XC61CN2602MR-G? A: The hysteresis voltage of XC61CN2602MR-G is typically 0.1V, which helps to prevent chattering or false triggering.
Q: Can XC61CN2602MR-G be used in automotive applications? A: Yes, XC61CN2602MR-G is suitable for automotive applications as it meets the AEC-Q100 standard and has a wide operating temperature range.
Q: What is the response time of XC61CN2602MR-G? A: The response time of XC61CN2602MR-G is typically 200µs, which ensures fast detection of voltage changes.
Q: Can XC61CN2602MR-G be used in battery-powered devices? A: Yes, XC61CN2602MR-G can be used in battery-powered devices as it has low quiescent current consumption, making it suitable for power-sensitive applications.
Please note that these answers are general and may vary depending on specific application requirements.