Torex Semiconductor Ltd
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
XC6124D626ER-G
Details bekijken DataSheets

XC6124D626ER-G

Product Overview

Category

XC6124D626ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6124D626ER-G comes in a small SOT-26 package.
  • Essence: This voltage regulator is designed to provide stable and regulated output voltage.
  • Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124D626ER-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.6V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124D626ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

The functional features of XC6124D626ER-G include:

  • Low dropout voltage: The regulator can maintain a stable output voltage even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes minimal current when there is no load, making it suitable for battery-powered applications.
  • Overcurrent protection: The device incorporates overcurrent protection to safeguard against excessive current flow.

Advantages and Disadvantages

Advantages: - Small package size allows for space-saving designs. - Wide input voltage range provides flexibility in various applications. - Low quiescent current prolongs battery life.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Dropout voltage may cause a slight decrease in efficiency.

Working Principles

The XC6124D626ER-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6124D626ER-G can be used in various applications, including but not limited to: 1. Battery-powered devices: Portable electronic devices such as smartphones, tablets, and wearable devices can benefit from its low quiescent current and small package size. 2. IoT devices: The regulator's wide input voltage range makes it suitable for powering IoT devices that operate on different power sources. 3. Automotive electronics: It can be used in automotive applications where a stable voltage supply is required for sensors, actuators, and control systems.

Detailed and Complete Alternative Models

Some alternative models to XC6124D626ER-G include: - XC6206P262MR-G - LM1117MPX-2.6/NOPB - MCP1700T-2602E/TT

These models offer similar functionality and specifications, providing alternatives for different design requirements.

Word count: 410 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van XC6124D626ER-G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of XC6124D626ER-G in technical solutions:

  1. Question: What is XC6124D626ER-G?
    - Answer: XC6124D626ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124D626ER-G?
    - Answer: The operating voltage range of XC6124D626ER-G is from 0.6V to 6.0V.

  3. Question: What is the typical supply current of XC6124D626ER-G?
    - Answer: The typical supply current of XC6124D626ER-G is 1.0μA.

  4. Question: How does XC6124D626ER-G detect voltage levels?
    - Answer: XC6124D626ER-G uses a built-in voltage reference and comparator to detect voltage levels. It compares the input voltage with a fixed threshold voltage and generates an output signal accordingly.

  5. Question: Can XC6124D626ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124D626ER-G is suitable for battery-powered applications due to its low supply current and wide operating voltage range.

  6. Question: What is the output type of XC6124D626ER-G?
    - Answer: XC6124D626ER-G has an open-drain output type, which means it can sink current but cannot source current.

  7. Question: What is the maximum output voltage of XC6124D626ER-G?
    - Answer: The maximum output voltage of XC6124D626ER-G is equal to the supply voltage.

  8. Question: Can XC6124D626ER-G be used for overvoltage protection?
    - Answer: No, XC6124D626ER-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection.

  9. Question: What is the typical response time of XC6124D626ER-G?
    - Answer: The typical response time of XC6124D626ER-G is 200μs.

  10. Question: Is XC6124D626ER-G RoHS compliant?
    - Answer: Yes, XC6124D626ER-G is RoHS (Restriction of Hazardous Substances) compliant, which means it does not contain hazardous materials like lead or mercury.

Please note that these answers are general and may vary depending on the specific application and requirements.