Torex Semiconductor Ltd
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
XC6124C437ER-G
Details bekijken DataSheets

XC6124C437ER-G

Product Overview

Category

XC6124C437ER-G belongs to the category of voltage regulators.

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.37V ±2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 20µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Package

XC6124C437ER-G comes in a small SOT-23-5 package.

Essence

The essence of XC6124C437ER-G is its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.37V ±2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 20µA (typical)
  • Line Regulation: ±0.1% (typical)
  • Load Regulation: ±0.3% (typical)
  • Ripple Rejection Ratio: 60dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C437ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • High ripple rejection ratio
  • Wide input voltage range
  • Short-circuit protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Small package size
  • Wide operating temperature range
  • Low quiescent current

Disadvantages

  • Limited maximum output current (150mA)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

XC6124C437ER-G is a linear voltage regulator that uses a feedback mechanism to maintain a stable output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6124C437ER-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C437ER-G are: - XC6206P437MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

Word count: 366 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van XC6124C437ER-G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of XC6124C437ER-G in technical solutions:

  1. Question: What is XC6124C437ER-G?
    - Answer: XC6124C437ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124C437ER-G?
    - Answer: The operating voltage range of XC6124C437ER-G is typically between 0.8V and 6.0V.

  3. Question: What is the output type of XC6124C437ER-G?
    - Answer: XC6124C437ER-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Question: What is the typical quiescent current consumption of XC6124C437ER-G?
    - Answer: The typical quiescent current consumption of XC6124C437ER-G is very low, usually around 1.0µA.

  5. Question: How does XC6124C437ER-G detect undervoltage conditions?
    - Answer: XC6124C437ER-G compares the input voltage with a fixed internal reference voltage. When the input voltage drops below the reference voltage, the output of XC6124C437ER-G goes low.

  6. Question: Can XC6124C437ER-G be used for overvoltage detection as well?
    - Answer: No, XC6124C437ER-G is specifically designed for undervoltage detection only. It does not have built-in overvoltage detection capabilities.

  7. Question: What is the typical hysteresis voltage of XC6124C437ER-G?
    - Answer: The typical hysteresis voltage of XC6124C437ER-G is around 0.1V, which helps to prevent output oscillation near the threshold voltage.

  8. Question: Can XC6124C437ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124C437ER-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  9. Question: Does XC6124C437ER-G have any built-in delay or time delay functions?
    - Answer: No, XC6124C437ER-G does not have any built-in delay or time delay functions. It provides an immediate output response when the input voltage falls below the threshold.

  10. Question: What is the package type of XC6124C437ER-G?
    - Answer: XC6124C437ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.