Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
XC6123D750ER-G

XC6123D750ER-G

Product Overview

Category

XC6123D750ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: XC6123D750ER-G comes in a small surface-mount package.
  • Essence: This voltage regulator provides stable and reliable voltage output.
  • Packaging/Quantity: It is typically available in reels or tubes, with varying quantities depending on the supplier.

Specifications

The specifications of XC6123D750ER-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 0.75V
  • Output Current: 150mA
  • Dropout Voltage: 100mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123D750ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage: The XC6123D750ER-G exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • Low quiescent current: With a low quiescent current, this voltage regulator minimizes power consumption during standby or idle periods.
  • Short-circuit protection: It incorporates short-circuit protection to safeguard the circuitry from damage in case of a fault.

Advantages and Disadvantages

Advantages

  • Compact size: The small surface-mount package makes it suitable for space-constrained applications.
  • Stable voltage output: XC6123D750ER-G provides a stable and reliable output voltage, ensuring proper functioning of connected components.
  • Low power consumption: The low quiescent current helps conserve power in battery-operated devices.

Disadvantages

  • Limited output current: With an output current of 150mA, XC6123D750ER-G may not be suitable for high-power applications.
  • Narrow input voltage range: The input voltage range of 2.5V - 6.0V may restrict its use in certain scenarios.

Working Principles

XC6123D750ER-G operates based on the principle of linear voltage regulation. It utilizes a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains constant despite variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6123D750ER-G finds applications in various electronic devices and systems, including but not limited to:

  1. Portable consumer electronics: It can be used in smartphones, tablets, portable media players, and other battery-powered devices.
  2. IoT devices: XC6123D750ER-G is suitable for powering sensors, microcontrollers, and communication modules in IoT applications.
  3. Automotive electronics: It can be employed in automotive infotainment systems, dashboard displays, and other vehicle electronics.
  4. Industrial control systems: XC6123D750ER-G is useful in regulating voltage for PLCs (Programmable Logic Controllers), motor drives, and other industrial automation equipment.

Detailed and Complete Alternative Models

Some alternative models to XC6123D750ER-G include:

  1. LM1117-3.3: A popular voltage regulator with similar specifications and package options.
  2. MCP1700-3302E: Another voltage regulator offering stable output voltage and low dropout characteristics.
  3. TS2940CX33: A low-power voltage regulator suitable for battery-powered applications.

These alternatives provide similar functionality and can be considered based on specific requirements and availability.

Word count: 489 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van XC6123D750ER-G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of XC6123D750ER-G in technical solutions:

  1. Question: What is XC6123D750ER-G?
    - Answer: XC6123D750ER-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the power supply voltage and provide a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123D750ER-G?
    - Answer: The operating voltage range of XC6123D750ER-G is from 0.7V to 6.0V.

  3. Question: What is the typical reset voltage of XC6123D750ER-G?
    - Answer: The typical reset voltage of XC6123D750ER-G is 0.75V.

  4. Question: How does XC6123D750ER-G detect the voltage level?
    - Answer: XC6123D750ER-G uses an internal voltage reference and a comparator to compare the input voltage with the reference voltage.

  5. Question: Can XC6123D750ER-G be used in battery-powered applications?
    - Answer: Yes, XC6123D750ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: Does XC6123D750ER-G have any built-in delay for the reset signal?
    - Answer: Yes, XC6123D750ER-G has a built-in delay of typically 200ms to prevent false resets due to voltage fluctuations.

  7. Question: What is the output type of XC6123D750ER-G?
    - Answer: XC6123D750ER-G has an open-drain output, which requires an external pull-up resistor.

  8. Question: Can XC6123D750ER-G be used in automotive applications?
    - Answer: Yes, XC6123D750ER-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: What is the temperature range of XC6123D750ER-G?
    - Answer: The operating temperature range of XC6123D750ER-G is from -40°C to +85°C.

  10. Question: Is XC6123D750ER-G available in different package options?
    - Answer: Yes, XC6123D750ER-G is available in a SOT-25 package, which is a small surface-mount package.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.