XC6123D516MR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize voltage levels in electronic circuits.
XC6123D516MR-G is available in a small SOT-23-5 package.
The essence of XC6123D516MR-G is to provide stable and regulated voltage output for various electronic devices.
XC6123D516MR-G is typically packaged in reels containing 3000 units.
XC6123D516MR-G has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: EN (Enable) Pin 4: NC (No Connection) Pin 5: VOUT (Output Voltage)
XC6123D516MR-G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage within the specified range.
XC6123D516MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Automotive electronics - Industrial control systems
Some alternative models to XC6123D516MR-G include: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6204B332MR-G - XC6201B332MR-G
These models offer similar functionality and characteristics, providing options for different design requirements.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of XC6123D516MR-G in technical solutions:
Q: What is XC6123D516MR-G? A: XC6123D516MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring and detecting voltage levels in various electronic applications.
Q: What is the operating voltage range of XC6123D516MR-G? A: The operating voltage range of XC6123D516MR-G is from 0.8V to 6.0V.
Q: What is the output type of XC6123D516MR-G? A: XC6123D516MR-G has an open-drain output type, which means it can sink current but cannot source current.
Q: What is the typical quiescent current consumption of XC6123D516MR-G? A: The typical quiescent current consumption of XC6123D516MR-G is very low, usually around 1.0µA.
Q: Can XC6123D516MR-G be used for overvoltage protection? A: No, XC6123D516MR-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection purposes.
Q: What is the accuracy of the voltage detection threshold in XC6123D516MR-G? A: The accuracy of the voltage detection threshold in XC6123D516MR-G is typically ±1.5%.
Q: Does XC6123D516MR-G have built-in hysteresis? A: Yes, XC6123D516MR-G has built-in hysteresis, which helps to prevent false triggering due to voltage fluctuations or noise.
Q: Can XC6123D516MR-G be used in battery-powered applications? A: Yes, XC6123D516MR-G is suitable for battery-powered applications as it has a low quiescent current and wide operating voltage range.
Q: What is the package type of XC6123D516MR-G? A: XC6123D516MR-G is available in a SOT-23-5 package, which is a small surface-mount package with five pins.
Q: Are there any application notes or reference designs available for XC6123D516MR-G? A: Yes, Torex Semiconductor provides application notes and reference designs on their website that can help users understand and implement XC6123D516MR-G in various technical solutions.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.