Zie specificaties voor productdetails.
XC6119N31A7R-G
Product Overview
Category
XC6119N31A7R-G belongs to the category of electronic components.
Use
It is commonly used in various electronic devices and circuits for voltage regulation and power management purposes.
Characteristics
- Voltage regulation capabilities
- Power management features
- Compact size
- High efficiency
- Low power consumption
Package
XC6119N31A7R-G is available in a small surface-mount package, which makes it suitable for integration into compact electronic devices.
Essence
The essence of XC6119N31A7R-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic systems.
Packaging/Quantity
XC6119N31A7R-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.1V
- Output Current: Up to 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6119N31A7R-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage Regulation: XC6119N31A7R-G ensures a stable output voltage of 3.1V regardless of input voltage fluctuations.
- Overcurrent Protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
- Thermal Shutdown: In case of high temperature, the device automatically shuts down to prevent damage.
- Low Power Consumption: The quiescent current of only 30µA ensures minimal power consumption during standby or idle states.
Advantages and Disadvantages
Advantages
- Efficient voltage regulation
- Compact size for easy integration
- Overcurrent protection for device safety
- Low power consumption
Disadvantages
- Limited output current capacity (up to 100mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
XC6119N31A7R-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuit accordingly to maintain a stable output.
Detailed Application Field Plans
XC6119N31A7R-G finds applications in various electronic devices and circuits, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices - Battery-powered systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6119N31A7R-G are: - XC6119N31B7R-G: Similar specifications with slight variations in output voltage. - XC6119N31C7R-G: Higher output current capacity with similar voltage regulation capabilities. - XC6119N31D7R-G: Lower dropout voltage for improved efficiency.
These alternative models provide flexibility in choosing the most suitable component based on specific requirements.
Word count: 440 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van XC6119N31A7R-G in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of XC6119N31A7R-G in technical solutions:
1. What is XC6119N31A7R-G? - XC6119N31A7R-G is a specific model of voltage detector IC (integrated circuit) used in various electronic devices.
2. What is the purpose of XC6119N31A7R-G? - The purpose of XC6119N31A7R-G is to monitor the voltage level in a circuit and provide an output signal when the voltage exceeds or falls below a certain threshold.
3. What are the typical applications of XC6119N31A7R-G? - XC6119N31A7R-G can be used in a wide range of applications such as battery-powered devices, power management systems, automotive electronics, and industrial control systems.
4. How does XC6119N31A7R-G work? - XC6119N31A7R-G works by comparing the input voltage with a reference voltage. If the input voltage crosses the threshold set by the reference voltage, it triggers the output signal.
5. What is the operating voltage range of XC6119N31A7R-G? - The operating voltage range of XC6119N31A7R-G is typically between 0.8V and 6.0V.
6. Can XC6119N31A7R-G be used for overvoltage protection? - Yes, XC6119N31A7R-G can be used for overvoltage protection by setting the threshold voltage to the desired maximum voltage level.
7. Is XC6119N31A7R-G suitable for low-power applications? - Yes, XC6119N31A7R-G is designed for low-power applications and has a very low quiescent current consumption.
8. What is the output type of XC6119N31A7R-G? - XC6119N31A7R-G provides an open-drain output, which means it can be connected to other devices with different voltage levels.
9. Can XC6119N31A7R-G be used in automotive applications? - Yes, XC6119N31A7R-G is suitable for automotive applications as it can withstand high temperatures and has built-in protection features.
10. Are there any alternative voltage detector ICs similar to XC6119N31A7R-G? - Yes, there are several alternative voltage detector ICs available in the market, such as XC6120 series, XC6206 series, and XC6501 series, each with its own specifications and features.
Please note that the specific details and answers may vary depending on the manufacturer's datasheet and application requirements.