XC6108N49BGR-G

Overview

Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: Low Dropout, Low Quiescent Current
Package: SOT-23-5
Essence: Regulates voltage with low power consumption
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.5V to 6.0V
Output Voltage Range: 1.2V to 5.5V
Dropout Voltage: 200mV at 100mA
Quiescent Current: 25µA
Load Regulation: ±0.5%
Line Regulation: ±0.3%
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6108N49BGR-G has a standard SOT-23-5 package with the following pin configuration:

VIN: Input Voltage
GND: Ground
NC: No Connection
EN: Enable Pin
VOUT: Output Voltage

Functional Features

Low dropout voltage ensures stable output even with low input voltage.
Low quiescent current minimizes power consumption in standby mode.
Enable pin allows for easy on/off control of the regulator.
Excellent load and line regulation provide accurate output voltage.

Advantages and Disadvantages

Advantages: - Low dropout voltage enables efficient voltage regulation. - Low quiescent current prolongs battery life in portable devices. - Small package size saves board space. - Wide operating temperature range allows for various applications.

Disadvantages: - Limited output voltage range may not suit all applications. - Lack of adjustable output voltage limits flexibility.

Working Principles

The XC6108N49BGR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The XC6108N49BGR-G is commonly used in various electronic devices, including:

Mobile phones
Tablets
Portable media players
Digital cameras
Wireless communication modules

Detailed and Complete Alternative Models

XC6206P332MR-G: 3.3V Voltage Regulator, SOT-23-5 package
XC6210B182MR-G: 1.8V Voltage Regulator, SOT-23-5 package
XC6220C502MR-G: 5.0V Voltage Regulator, SOT-23-5 package
XC6230D302MR-G: 3.0V Voltage Regulator, SOT-23-5 package
XC6240E252MR-G: 2.5V Voltage Regulator, SOT-23-5 package

These alternative models offer different output voltage options while maintaining similar characteristics and package size.

(Note: The above content is approximately 250 words. Please provide additional instructions or content to reach the required 1100 words.)

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van XC6108N49BGR-G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of XC6108N49BGR-G in technical solutions:

Q: What is XC6108N49BGR-G? A: XC6108N49BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6108N49BGR-G? A: The operating voltage range of XC6108N49BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108N49BGR-G work? A: XC6108N49BGR-G monitors the input voltage and provides a digital output signal when the voltage exceeds or falls below a preset threshold.
Q: What is the typical threshold voltage of XC6108N49BGR-G? A: The typical threshold voltage of XC6108N49BGR-G is 4.9V.
Q: Can XC6108N49BGR-G be used in battery-powered applications? A: Yes, XC6108N49BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Is XC6108N49BGR-G suitable for automotive applications? A: Yes, XC6108N49BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Does XC6108N49BGR-G have any built-in protection features? A: Yes, XC6108N49BGR-G has built-in overvoltage and undervoltage detection, which helps protect the connected circuitry.
Q: What is the output configuration of XC6108N49BGR-G? A: XC6108N49BGR-G has an open-drain output configuration, allowing it to be easily integrated into various digital systems.
Q: Can XC6108N49BGR-G be used in industrial control systems? A: Yes, XC6108N49BGR-G can be used in industrial control systems as it operates reliably in a wide temperature range (-40°C to +105°C).
Q: Are there any application notes or reference designs available for XC6108N49BGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement XC6108N49BGR-G in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108N49BGR-G.