Zie specificaties voor productdetails.
XC6108N33BGR-G
Product Overview
Category
XC6108N33BGR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize the voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 3.3V
- Maximum Output Current: 150mA
- Low Dropout Voltage: 200mV (typical)
- Low Quiescent Current: 30μA (typical)
- Thermal Shutdown Protection
- Short Circuit Protection
Package
XC6108N33BGR-G is available in a small SOT-23-5 package.
Essence
The essence of XC6108N33BGR-G is to provide a stable and regulated output voltage for electronic devices.
Packaging/Quantity
It is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 3.3V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT-23-5
Detailed Pin Configuration
XC6108N33BGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- NC (No Connection)
- EN (Enable)
- VOUT (Output Voltage)
Functional Features
- Voltage Regulation: XC6108N33BGR-G provides a stable output voltage of 3.3V regardless of input voltage fluctuations.
- Low Dropout Voltage: It has a low dropout voltage of 200mV, ensuring efficient power conversion.
- Low Quiescent Current: The device consumes only 30μA of current in standby mode, minimizing power consumption.
- Thermal Shutdown Protection: It incorporates thermal shutdown protection to prevent overheating and damage.
- Short Circuit Protection: XC6108N33BGR-G is equipped with short circuit protection to safeguard the circuit from excessive current.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows compatibility with various power sources.
- Low dropout voltage ensures efficient power conversion.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating and damage.
- Short circuit protection safeguards the circuit.
Disadvantages
- Limited output current capacity (up to 150mA).
Working Principles
XC6108N33BGR-G operates based on a voltage regulation principle. It uses internal circuitry to compare the output voltage with a reference voltage and adjusts the output accordingly. By continuously monitoring and regulating the voltage, it ensures a stable output of 3.3V.
Detailed Application Field Plans
XC6108N33BGR-G finds applications in various electronic devices and circuits that require a regulated 3.3V power supply. Some common application fields include:
- Microcontrollers and microprocessors
- Sensors and sensor modules
- Wireless communication modules
- Battery-powered devices
- Portable consumer electronics
- Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6108N33BGR-G are:
- LM1117-3.3: A popular voltage regulator with a fixed 3.3V output.
- MCP1700-3302E: Low dropout voltage regulator with a 3.3V output.
- AMS1117-3.3: Adjustable voltage regulator with a 3.3V output.
- LP2985-33DBVR: Ultra-low quiescent current voltage regulator with a 3.3V output.
These alternative models can be considered based on specific requirements and design constraints.
Word count: 529 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van XC6108N33BGR-G in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of XC6108N33BGR-G in technical solutions:
Q: What is XC6108N33BGR-G? A: XC6108N33BGR-G is a voltage detector IC (Integrated Circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6108N33BGR-G? A: The operating voltage range of XC6108N33BGR-G is typically between 0.9V and 6.0V.
Q: What is the purpose of using XC6108N33BGR-G in a technical solution? A: XC6108N33BGR-G is commonly used to ensure proper system initialization and reliable operation by monitoring the power supply voltage and generating a reset signal when necessary.
Q: How does XC6108N33BGR-G detect the power supply voltage? A: XC6108N33BGR-G uses an internal voltage reference and a comparator to monitor the power supply voltage. When the voltage drops below the threshold, it triggers the reset signal.
Q: Can XC6108N33BGR-G be used in battery-powered applications? A: Yes, XC6108N33BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: What is the typical reset output delay time of XC6108N33BGR-G? A: The typical reset output delay time of XC6108N33BGR-G is around 200ms, which ensures stable power-on reset for the system.
Q: Is XC6108N33BGR-G suitable for automotive applications? A: Yes, XC6108N33BGR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.
Q: Can XC6108N33BGR-G be used in low-power microcontroller systems? A: Yes, XC6108N33BGR-G is commonly used in low-power microcontroller systems to ensure reliable power-on reset and prevent erratic behavior during power-up.
Q: Does XC6108N33BGR-G have any built-in protection features? A: Yes, XC6108N33BGR-G has built-in overcurrent protection and thermal shutdown features to protect the IC from damage under abnormal conditions.
Q: Are there any specific application notes or reference designs available for XC6108N33BGR-G? A: Yes, the manufacturer of XC6108N33BGR-G provides application notes and reference designs that can help users understand its usage and optimize its performance in various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of XC6108N33BGR-G.