Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
UCC28083PWR
Details bekijken DataSheets

UCC28083PWR

Introduction

The UCC28083PWR is a power management integrated circuit (IC) belonging to the category of voltage mode controllers. This IC is commonly used in power supply applications and offers various characteristics that make it suitable for a wide range of power management tasks. The UCC28083PWR comes in a small package and is known for its efficiency, reliability, and flexibility in power supply designs.

Basic Information Overview

  • Category: Voltage Mode Controller
  • Use: Power supply applications
  • Characteristics: Efficiency, reliability, flexibility
  • Package: Small outline package (SOIC)
  • Essence: Power management IC
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Input Voltage: 8V to 700V
  • Output Voltage: 0.9V to 1.5xVIN
  • Operating Temperature: -40°C to 125°C
  • Switching Frequency: Up to 500kHz
  • Output Current: Up to 2A

Detailed Pin Configuration

The UCC28083PWR has a standard pin configuration with pins for input voltage, ground, feedback, output, and control signals. The detailed pinout is as follows: 1. VDD (Power Supply) 2. RT/CT (Timing Resistor/Capacitor) 3. COMP (Error Amplifier Output) 4. FB (Feedback Input) 5. CS (Current Sense Input) 6. GND (Ground) 7. DRV (Gate Driver Output) 8. VCC (Supply Voltage)

Functional Features

  • Voltage Mode Control: Precise regulation of output voltage
  • Overcurrent Protection: Safeguards against excessive current flow
  • Soft Start Function: Gradual increase of output voltage to prevent overshoot
  • Adaptive UVLO: Adaptive under-voltage lockout for enhanced reliability
  • Internal Oscillator: Simplifies design and reduces external components

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Integrated protection features
  • Compact package size

Disadvantages

  • Limited output current compared to some alternatives
  • Higher cost compared to basic linear regulators

Working Principles

The UCC28083PWR operates on the principle of voltage mode control, where the feedback from the output voltage is compared to a reference voltage to regulate the duty cycle of the power switch. This regulation ensures a stable output voltage despite variations in input voltage and load conditions. The IC also incorporates various protection features to ensure safe and reliable operation.

Detailed Application Field Plans

The UCC28083PWR finds extensive use in various power supply applications, including: - AC/DC Converters - LED Drivers - Industrial Power Supplies - Renewable Energy Systems - Battery Chargers

Detailed and Complete Alternative Models

Some alternative models to the UCC28083PWR include: - UCC28084: Similar functionality with enhanced current handling capability - LM5117: Buck controller with similar input voltage range - IR1150: Digital PWM controller with advanced features

In conclusion, the UCC28083PWR is a versatile voltage mode controller IC with a wide range of applications in power supply designs. Its efficient operation, integrated protection features, and compact package make it a popular choice for various power management tasks.

Word Count: 536

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van UCC28083PWR in technische oplossingen

  1. What is the UCC28083PWR?

    • The UCC28083PWR is a power factor correction (PFC) controller designed for use in AC-DC power supplies.

  2. What is the input voltage range of the UCC28083PWR?

    • The UCC28083PWR has an input voltage range of 85VAC to 265VAC.

  3. What is the output voltage range of the UCC28083PWR?

    • The UCC28083PWR can regulate the output voltage to suit the specific requirements of the application, typically in the range of 380VDC to 400VDC.

  4. What are the key features of the UCC28083PWR?

    • The UCC28083PWR features include high power factor, low total harmonic distortion, and overvoltage protection.

  5. How does the UCC28083PWR achieve power factor correction?

    • The UCC28083PWR uses a boost converter configuration to achieve power factor correction by shaping the input current to be in phase with the input voltage.

  6. What are the typical applications of the UCC28083PWR?

    • The UCC28083PWR is commonly used in AC-DC power supplies for applications such as LED lighting, industrial equipment, and consumer electronics.

  7. What is the switching frequency of the UCC28083PWR?

    • The UCC28083PWR has a fixed switching frequency of 65kHz.

  8. What protections does the UCC28083PWR offer?

    • The UCC28083PWR provides protections against overvoltage, overcurrent, and overtemperature conditions.

  9. What is the efficiency of the UCC28083PWR?

    • The UCC28083PWR offers high efficiency, typically above 90%, when used in power supply designs.

  10. Is the UCC28083PWR suitable for universal input voltage applications?

    • Yes, the UCC28083PWR's wide input voltage range makes it suitable for universal input voltage applications, such as those found in global markets.