Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
UCC28019D
Details bekijken DataSheets

UCC28019D - English Editing Encyclopedia Entry

Product Overview

Category

UCC28019D belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is commonly used in various power supply systems, including switch-mode power supplies (SMPS), battery chargers, and LED drivers.

Characteristics

  • UCC28019D is a highly efficient and versatile power management IC.
  • It offers excellent performance in terms of voltage regulation, current control, and protection features.
  • The IC operates at high frequencies, enabling compact and lightweight power supply designs.
  • It supports both continuous and discontinuous conduction modes, providing flexibility in different load conditions.

Package

UCC28019D is available in a small outline package (SOP) or dual in-line package (DIP). The package type ensures easy integration into circuit boards and facilitates heat dissipation.

Essence

The essence of UCC28019D lies in its ability to efficiently regulate and control power in various applications, ensuring stable and reliable operation.

Packaging/Quantity

UCC28019D is typically packaged in reels or tubes, with quantities varying based on customer requirements. Commonly available quantities range from a few hundred to several thousand units per package.

Specifications

  • Input Voltage Range: 8V to 16V
  • Output Voltage Range: 0V to 5V
  • Maximum Output Current: 2A
  • Switching Frequency: 100kHz to 1MHz
  • Operating Temperature Range: -40°C to 125°C
  • Supply Voltage: 3.3V to 5V

Detailed Pin Configuration

UCC28019D features a standard pin configuration with the following pins:

  1. VDD: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. COMP: Compensation pin for stability control
  5. CS: Current sense input
  6. RT/CT: Timing components connection
  7. SS/TR/UVLO: Soft-start, shutdown, and undervoltage lockout control
  8. OUT: Output voltage

Functional Features

  • Voltage Regulation: UCC28019D provides precise voltage regulation through its feedback loop, ensuring stable output voltages even under varying load conditions.
  • Current Control: The IC incorporates current sensing and control mechanisms to maintain accurate current levels, preventing overloading or short circuits.
  • Protection Features: UCC28019D includes built-in protection features such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown, safeguarding the system from potential damage.
  • Soft-Start: The soft-start feature allows gradual ramp-up of the output voltage, reducing inrush currents and minimizing stress on components during startup.

Advantages and Disadvantages

Advantages

  • High efficiency and excellent performance in power management applications.
  • Wide input voltage range enables compatibility with various power sources.
  • Compact package design facilitates easy integration into circuit boards.
  • Versatile functionality supports different power supply topologies.
  • Built-in protection features enhance system reliability and safety.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Requires external timing components for frequency control.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

UCC28019D operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal applied to the power stage. This control mechanism ensures that the desired output voltage is maintained within specified limits, compensating for load variations and input voltage changes.

Detailed Application Field Plans

UCC28019D finds extensive application in the following areas:

  1. Switch-Mode Power Supplies (SMPS): Used in various electronic devices, including computers, televisions, and industrial equipment.
  2. Battery Chargers: Enables efficient charging of batteries in portable devices, electric vehicles, and renewable energy systems.
  3. LED Drivers: Provides precise control over the current supplied to LEDs, ensuring optimal brightness and longevity.

Detailed and Complete Alternative Models

  1. UCC28019: Similar to UCC28019D but without the "D" suffix, offering slightly different specifications.
  2. UCC28020: A higher-power variant with increased maximum output current and wider input voltage range.
  3. UCC28021: Designed for specific applications requiring additional features such as power factor correction (PFC).

These alternative models provide options based on specific requirements and can be considered as suitable replacements for UCC28019D in various scenarios.

Word count: 570 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van UCC28019D in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of UCC28019D in technical solutions:

  1. Q: What is UCC28019D? A: UCC28019D is a high-performance, current-mode PWM controller designed for offline and DC-to-DC power supplies.

  2. Q: What are the key features of UCC28019D? A: Some key features include wide input voltage range, integrated high-voltage startup, cycle-by-cycle current limit, and adjustable switching frequency.

  3. Q: How can UCC28019D be used in offline power supplies? A: UCC28019D can be used as the primary side controller in offline power supplies, providing control and regulation of the power conversion process.

  4. Q: Can UCC28019D be used in DC-to-DC converters? A: Yes, UCC28019D can also be used in DC-to-DC converters, enabling efficient power conversion in various applications.

  5. Q: What is the maximum input voltage supported by UCC28019D? A: The maximum input voltage supported by UCC28019D is typically around 600V.

  6. Q: How does UCC28019D ensure safe operation? A: UCC28019D incorporates various protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown to ensure safe operation.

  7. Q: Can UCC28019D support multiple output voltages? A: Yes, UCC28019D can support multiple output voltages by implementing appropriate feedback and control circuitry.

  8. Q: Is UCC28019D suitable for high-power applications? A: Yes, UCC28019D is suitable for high-power applications as it can handle high input voltages and provide efficient power conversion.

  9. Q: What is the typical switching frequency range of UCC28019D? A: The typical switching frequency range of UCC28019D is between 20kHz and 500kHz, allowing flexibility in design.

  10. Q: Are there any application notes or reference designs available for UCC28019D? A: Yes, Texas Instruments provides application notes and reference designs that can help in implementing UCC28019D in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It's always recommended to refer to the datasheet and relevant documentation for accurate information.