Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
SN75C1168PWRG4

SN75C1168PWRG4

Product Overview

Category

SN75C1168PWRG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal conditioning and data transmission.

Characteristics

  • Signal conditioning: SN75C1168PWRG4 is designed to enhance the quality and reliability of signals.
  • Data transmission: It facilitates the efficient transfer of data between different components of an electronic system.

Package

SN75C1168PWRG4 is available in a small outline package (SOP) with a power pad for improved thermal performance.

Essence

The essence of SN75C1168PWRG4 lies in its ability to optimize signal integrity and ensure reliable data transmission.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specified quantity of SN75C1168PWRG4 ICs.

Specifications

  • Supply voltage range: 2.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Data rate: Up to 100 Mbps
  • Number of channels: 1
  • Input/output interface: LVDS (Low Voltage Differential Signaling)
  • Package type: TSSOP (Thin Shrink Small Outline Package)

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. IN: LVDS input signal
  4. OUT: LVDS output signal
  5. EN: Enable pin for controlling the IC's operation
  6. NC: No connection (reserved pin)

Functional Features

  • LVDS Interface: SN75C1168PWRG4 supports LVDS signaling, which provides high-speed, low-power data transmission.
  • Signal Conditioning: The IC incorporates features like equalization and pre-emphasis to compensate for signal degradation.
  • ESD Protection: It offers built-in electrostatic discharge (ESD) protection, safeguarding the IC from damage due to static electricity.

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Low power consumption
  • Compact package size
  • Built-in ESD protection

Disadvantages

  • Limited number of channels (only 1)
  • Requires LVDS-compatible devices for proper operation

Working Principles

SN75C1168PWRG4 operates by receiving LVDS input signals through the IN pin. The IC conditions these signals using equalization and pre-emphasis techniques to compensate for any distortion or attenuation. The processed signals are then transmitted as LVDS output through the OUT pin.

Detailed Application Field Plans

SN75C1168PWRG4 finds applications in various fields, including: - Telecommunications - Industrial automation - Automotive electronics - Medical equipment - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SN75C1168PWRG4 are: - SN65LVDS1168 - DS90LV011A - MAX9126

These models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 410 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SN75C1168PWRG4 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of SN75C1168PWRG4 in technical solutions:

  1. Q: What is SN75C1168PWRG4? A: SN75C1168PWRG4 is a high-speed differential line driver and receiver designed for applications requiring ultra-low power consumption.

  2. Q: What is the operating voltage range of SN75C1168PWRG4? A: The operating voltage range of SN75C1168PWRG4 is typically between 3.0V and 3.6V.

  3. Q: What is the maximum data rate supported by SN75C1168PWRG4? A: SN75C1168PWRG4 supports a maximum data rate of 400 Mbps.

  4. Q: Can SN75C1168PWRG4 be used in industrial applications? A: Yes, SN75C1168PWRG4 is suitable for use in industrial applications due to its wide operating temperature range (-40°C to +85°C) and robust design.

  5. Q: Does SN75C1168PWRG4 support full-duplex communication? A: Yes, SN75C1168PWRG4 supports full-duplex communication, allowing simultaneous transmission and reception of data.

  6. Q: What is the output voltage swing of SN75C1168PWRG4? A: The output voltage swing of SN75C1168PWRG4 is typically ±1.5V.

  7. Q: Can SN75C1168PWRG4 be used in battery-powered devices? A: Yes, SN75C1168PWRG4 is suitable for battery-powered devices as it has a low power consumption of typically 10mW.

  8. Q: What is the input common-mode voltage range of SN75C1168PWRG4? A: The input common-mode voltage range of SN75C1168PWRG4 is typically between -1V and +2V.

  9. Q: Does SN75C1168PWRG4 have built-in ESD protection? A: Yes, SN75C1168PWRG4 has built-in ESD protection, making it more robust against electrostatic discharge events.

  10. Q: Can SN75C1168PWRG4 be used in automotive applications? A: Yes, SN75C1168PWRG4 is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.