Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
SN74LV573ADGVR
Details bekijken DataSheets

SN74LV573ADGVR

Product Overview

Category: Integrated Circuit (IC)

Use: The SN74LV573ADGVR is a latch/flip-flop IC that is widely used in digital electronics for storing and transferring data. It belongs to the 74 series of integrated circuits, which are commonly used in various applications such as computers, communication devices, and consumer electronics.

Characteristics: - Low-voltage operation - High-speed performance - Wide operating temperature range - Low power consumption

Package: The SN74LV573ADGVR is available in a small form factor package known as VSSOP (Very Small Outline Package). This package offers a compact size and allows for easy integration into electronic circuit boards.

Essence: The essence of the SN74LV573ADGVR lies in its ability to store and transfer data reliably and efficiently. It provides a stable and secure means of holding information within a digital system.

Packaging/Quantity: The SN74LV573ADGVR is typically sold in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Compatibility: TTL/CMOS
  • Maximum Clock Frequency: 100MHz
  • Number of Latches/Flip-Flops: 8

Detailed Pin Configuration

The SN74LV573ADGVR has a total of 20 pins, each serving a specific function. Here is the detailed pin configuration:

  1. OE (Output Enable)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. GND (Ground)
  11. Q0 (Latch/Flip-Flop Output 0)
  12. Q1 (Latch/Flip-Flop Output 1)
  13. Q2 (Latch/Flip-Flop Output 2)
  14. Q3 (Latch/Flip-Flop Output 3)
  15. Q4 (Latch/Flip-Flop Output 4)
  16. Q5 (Latch/Flip-Flop Output 5)
  17. Q6 (Latch/Flip-Flop Output 6)
  18. Q7 (Latch/Flip-Flop Output 7)
  19. CP (Clock Pulse)
  20. VCC (Supply Voltage)

Functional Features

The SN74LV573ADGVR offers the following functional features:

  • Data storage and transfer: The IC can store data on its inputs and transfer it to the outputs upon receiving a clock pulse.
  • Output enable control: The OE pin allows for enabling or disabling the outputs, providing flexibility in controlling data flow.
  • Compatibility: The IC is compatible with both TTL and CMOS logic levels, making it suitable for integration into various digital systems.
  • High-speed operation: With a maximum clock frequency of 100MHz, the IC ensures efficient data processing.

Advantages and Disadvantages

Advantages: - Low-voltage operation allows for compatibility with modern electronic systems. - High-speed performance enables fast data processing. - Wide operating temperature range ensures reliability in different environments. - Low power consumption contributes to energy efficiency.

Disadvantages: - Limited number of latches/flip-flops (8) may not be sufficient for certain applications requiring more storage capacity. - Small package size (VSSOP) may pose challenges in handling and soldering for some users.

Working Principles

The SN74LV573ADGVR operates based on latch/flip-flop principles. When the clock pulse is applied to the CP pin, the data present at the input pins (D0-D7) is latched and transferred to the corresponding output pins (Q0-Q7). The OE pin controls the enable/disable state of the outputs, allowing for data flow control.

Detailed Application Field Plans

The SN74LV573ADGVR finds applications in various fields, including:

  1. Computers: Used in memory modules, registers, and data storage units.
  2. Communication devices: Employed in routers, switches, and network equipment for data processing and routing.
  3. Consumer electronics: Integrated into digital TVs, set-top boxes, and gaming consoles for data manipulation and control.
  4. Industrial automation: Utilized in control systems, PLCs (Programmable Logic Controllers), and robotics for data storage and transfer.

Detailed and Complete Alternative Models

  1. SN74LV573APWR
  2. SN74LV573

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SN74LV573ADGVR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of SN74LV573ADGVR:

  1. Q: What is SN74LV573ADGVR? A: SN74LV573ADGVR is a octal transparent D-type latch with 3-state outputs, commonly used in digital systems.

  2. Q: What is the operating voltage range for SN74LV573ADGVR? A: The operating voltage range for SN74LV573ADGVR is typically between 2.0V and 5.5V.

  3. Q: What is the maximum output current that SN74LV573ADGVR can drive? A: SN74LV573ADGVR can drive up to 12mA of current per output pin.

  4. Q: Can SN74LV573ADGVR be used in both parallel and serial data transfer applications? A: Yes, SN74LV573ADGVR can be used in both parallel and serial data transfer applications.

  5. Q: Does SN74LV573ADGVR support 3-state outputs? A: Yes, SN74LV573ADGVR supports 3-state outputs, allowing multiple devices to share a common bus.

  6. Q: What is the typical propagation delay of SN74LV573ADGVR? A: The typical propagation delay of SN74LV573ADGVR is around 5ns.

  7. Q: Can SN74LV573ADGVR be used in high-speed applications? A: Yes, SN74LV573ADGVR is designed for high-speed operation and can be used in such applications.

  8. Q: Is SN74LV573ADGVR compatible with TTL logic levels? A: Yes, SN74LV573ADGVR is compatible with both TTL and CMOS logic levels.

  9. Q: Can SN74LV573ADGVR be used in automotive applications? A: Yes, SN74LV573ADGVR is qualified for automotive applications and can operate in harsh environments.

  10. Q: What is the package type for SN74LV573ADGVR? A: SN74LV573ADGVR is available in a small VSSOP-20 package.

Please note that these answers are general and may vary depending on the specific application and requirements.