Texas Instruments
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
SN74LS126ADG4
Details bekijken DataSheets

SN74LS126ADG4

Product Overview

Category

SN74LS126ADG4 belongs to the category of integrated circuits (ICs).

Use

It is commonly used in electronic devices for signal amplification and switching purposes.

Characteristics

  • Low power consumption
  • High-speed operation
  • Wide operating voltage range
  • Compatibility with TTL logic levels

Package

SN74LS126ADG4 is available in a 14-pin dual in-line package (DIP).

Essence

The essence of SN74LS126ADG4 lies in its ability to amplify and switch signals efficiently, making it an essential component in various electronic applications.

Packaging/Quantity

SN74LS126ADG4 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs.

Specifications

  • Supply Voltage: 4.75V to 5.25V
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: LS
  • Number of Pins: 14
  • Input/Output Type: Tri-State Buffer

Detailed Pin Configuration

  1. GND (Ground)
  2. A1 (Input A1)
  3. Y1 (Output Y1)
  4. A2 (Input A2)
  5. Y2 (Output Y2)
  6. Enable (Enable Input)
  7. GND (Ground)
  8. B1 (Input B1)
  9. Y3 (Output Y3)
  10. B2 (Input B2)
  11. Y4 (Output Y4)
  12. VCC (Supply Voltage)
  13. GND (Ground)
  14. NC (No Connection)

Functional Features

  • Quad 3-state buffer
  • Independent enable control for each buffer
  • Non-inverting outputs
  • High output drive capability

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High-speed operation
  • Wide operating voltage range
  • Compatibility with TTL logic levels
  • Independent enable control for each buffer

Disadvantages

  • Limited number of buffers (4 in this case)
  • Not suitable for applications requiring a large number of buffers

Working Principles

SN74LS126ADG4 operates by receiving input signals through the A1, A2, B1, and B2 pins. The enable pin controls the output state of each buffer. When the enable pin is high, the corresponding buffer's output is enabled, allowing the signal to pass through. Conversely, when the enable pin is low, the buffer's output is disabled, effectively isolating the signal.

Detailed Application Field Plans

SN74LS126ADG4 finds applications in various electronic devices and systems, including: - Data communication equipment - Industrial control systems - Automotive electronics - Consumer electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models that can be used as substitutes for SN74LS126ADG4 include: - 74HC126 - CD74HCT126E - MC74HC126N - SN74LVC126APW

These alternatives offer similar functionality and can be used interchangeably depending on specific requirements.

Word count: 410 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SN74LS126ADG4 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of SN74LS126ADG4 in technical solutions:

  1. Question: What is SN74LS126ADG4?
    - Answer: SN74LS126ADG4 is a quad bus buffer gate with 3-state outputs, commonly used in digital logic circuits.

  2. Question: What is the operating voltage range for SN74LS126ADG4?
    - Answer: The operating voltage range for SN74LS126ADG4 is typically between 4.75V and 5.25V.

  3. Question: What is the maximum output current that SN74LS126ADG4 can handle?
    - Answer: SN74LS126ADG4 can handle a maximum output current of 8mA per channel.

  4. Question: Can SN74LS126ADG4 be used as a level shifter?
    - Answer: Yes, SN74LS126ADG4 can be used as a level shifter to convert signals between different voltage levels.

  5. Question: How many channels does SN74LS126ADG4 have?
    - Answer: SN74LS126ADG4 has four independent channels, each with a separate input and output.

  6. Question: What is the propagation delay of SN74LS126ADG4?
    - Answer: The propagation delay of SN74LS126ADG4 is typically around 15ns.

  7. Question: Can SN74LS126ADG4 be used in high-speed applications?
    - Answer: SN74LS126ADG4 is not specifically designed for high-speed applications, but it can be used in moderate-speed digital systems.

  8. Question: Is SN74LS126ADG4 compatible with TTL logic levels?
    - Answer: Yes, SN74LS126ADG4 is compatible with TTL logic levels and can be used in TTL-based systems.

  9. Question: Can SN74LS126ADG4 drive capacitive loads?
    - Answer: Yes, SN74LS126ADG4 can drive capacitive loads up to 15pF.

  10. Question: What is the package type for SN74LS126ADG4?
    - Answer: SN74LS126ADG4 is available in a standard 14-pin SOIC (Small Outline Integrated Circuit) package.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.