Zie specificaties voor productdetails.
SN74ALS193AD
Product Overview
Category
SN74ALS193AD belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used in digital electronics for various applications such as counters, frequency dividers, and time delay circuits.
Characteristics
- High-speed operation
- Low power consumption
- Wide operating voltage range
- Schottky-clamped inputs for improved noise immunity
- TTL-compatible inputs and outputs
Package
SN74ALS193AD is available in a 16-pin dual in-line package (DIP) format.
Essence
The essence of SN74ALS193AD lies in its ability to perform accurate counting and timing functions in digital circuits.
Packaging/Quantity
SN74ALS193AD is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier.
Specifications
- Supply Voltage: 4.5V to 5.5V
- Operating Temperature Range: -40°C to +85°C
- Maximum Clock Frequency: 25 MHz
- Maximum Counting Range: 0 to 15 (4-bit binary counter)
- Output Drive Capability: 10 TTL loads
Detailed Pin Configuration
- CLK (Clock Input)
- MR (Master Reset Input)
- CPD (Count Enable Parallel Input)
- P0 (Parallel Data Input Bit 0)
- P1 (Parallel Data Input Bit 1)
- P2 (Parallel Data Input Bit 2)
- P3 (Parallel Data Input Bit 3)
- Q0 (Serial Data Output Bit 0)
- Q1 (Serial Data Output Bit 1)
- Q2 (Serial Data Output Bit 2)
- Q3 (Serial Data Output Bit 3)
- GND (Ground)
- CEP (Count Enable Parallel Input)
- CET (Count Enable Trickle Input)
- VCC (Supply Voltage)
- TC (Terminal Count Output)
Functional Features
- Synchronous operation with a common clock input
- Asynchronous master reset for clearing the counter
- Parallel load capability for presetting the counter value
- Serial data output for cascading multiple counters
- Terminal count output for indicating when the maximum count is reached
Advantages and Disadvantages
Advantages
- High-speed operation allows for efficient counting and timing applications.
- Low power consumption makes it suitable for battery-powered devices.
- Wide operating voltage range provides flexibility in various electronic systems.
- Schottky-clamped inputs enhance noise immunity, ensuring reliable performance.
- TTL-compatible inputs and outputs enable easy integration with other digital components.
Disadvantages
- Limited counting range of 0 to 15 may not be sufficient for certain applications requiring larger counts.
- Lack of built-in error detection or correction mechanisms may lead to potential errors in counting operations.
Working Principles
SN74ALS193AD operates based on synchronous binary counting principles. The clock input drives the internal flip-flops, causing the counter to increment by one on each rising edge of the clock signal. The parallel load capability allows users to preset the counter value using the parallel data inputs. The master reset input asynchronously clears the counter to its initial state. The serial data output enables cascading multiple counters to achieve higher counting ranges.
Detailed Application Field Plans
SN74ALS193AD finds applications in various fields, including: 1. Digital frequency dividers 2. Time delay circuits 3. Industrial automation systems 4. Communication equipment 5. Automotive electronics 6. Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to SN74ALS193AD are: 1. CD40193 - CMOS version with similar functionality 2. 74HC193 - High-speed CMOS version with improved power consumption 3. CD74HCT193 - High-speed CMOS version with TTL-compatible inputs and outputs
These alternative models offer similar counting and timing capabilities, but with different characteristics and specifications.
In conclusion, SN74ALS193AD is a versatile integrated circuit used for accurate counting and timing functions in digital electronics. Its high-speed operation, low power consumption, and wide operating voltage range make it suitable for various applications. However, its limited counting range and lack of error detection mechanisms should be considered when selecting this IC for specific projects.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SN74ALS193AD in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of SN74ALS193AD in technical solutions:
Q: What is SN74ALS193AD? A: SN74ALS193AD is a 4-bit synchronous up/down binary counter with dual clock inputs.
Q: What is the operating voltage range for SN74ALS193AD? A: The operating voltage range for SN74ALS193AD is typically between 4.5V and 5.5V.
Q: Can SN74ALS193AD be used as a frequency divider? A: Yes, SN74ALS193AD can be used as a frequency divider by connecting the appropriate clock inputs.
Q: How many clock inputs does SN74ALS193AD have? A: SN74ALS193AD has two clock inputs - an up clock (CP) and a down clock (CP).
Q: What is the maximum clock frequency supported by SN74ALS193AD? A: The maximum clock frequency supported by SN74ALS193AD is typically around 40 MHz.
Q: Can SN74ALS193AD be cascaded to create larger counters? A: Yes, multiple SN74ALS193AD counters can be cascaded together to create larger counters.
Q: Does SN74ALS193AD have any asynchronous inputs? A: No, SN74ALS193AD does not have any asynchronous inputs. It operates synchronously.
Q: What is the maximum count value that SN74ALS193AD can reach? A: SN74ALS193AD can count up to a maximum value of 15 (1111 in binary).
Q: Can SN74ALS193AD be used in both up-counting and down-counting modes? A: Yes, SN74ALS193AD can be used in both up-counting and down-counting modes based on the clock inputs.
Q: What are some typical applications of SN74ALS193AD? A: SN74ALS193AD is commonly used in applications such as frequency division, event counting, and time delay generation.
Please note that these answers are general and may vary depending on specific use cases and datasheet specifications.