The SN74AHC74DBR has a total of 14 pins:
Advantages: - High-speed operation allows for efficient data transfer - Low-power consumption helps in reducing energy usage - Synchronous reset capability provides control over the flip-flop state
Disadvantages: - Limited voltage supply range (2 V to 5.5 V) - Operating temperature range may not be suitable for extreme environments
The SN74AHC74DBR is a dual D-type positive-edge-triggered flip-flop. It stores and transfers data based on the clock pulse input. The clear input allows for synchronous reset of both flip-flops, ensuring controlled initialization. The complementary outputs provide the inverted and non-inverted versions of the stored data.
The SN74AHC74DBR can be used in various digital systems where data storage and transfer are required. Some potential application fields include:
(Note: This list is not exhaustive and there may be other alternative models available in the market.)
In conclusion, the SN74AHC74DBR is a high-speed, low-power dual D-type positive-edge-triggered flip-flop IC. It offers efficient data storage and transfer capabilities in various digital systems. Its advantages include high-speed operation, low power consumption, and synchronous reset capability. However, it has limitations in terms of voltage supply range and operating temperature. Alternative models such as SN74AHC74DR, SN74LVC74ADB, and MC74HC74AN provide similar functionality and can be considered as alternatives to SN74AHC74DBR.
Sure! Here are 10 common questions and answers related to the application of SN74AHC74DBR in technical solutions:
Q: What is SN74AHC74DBR? A: SN74AHC74DBR is a dual positive-edge-triggered D-type flip-flop integrated circuit (IC) that can store one bit of data.
Q: What is the operating voltage range for SN74AHC74DBR? A: The operating voltage range for SN74AHC74DBR is typically between 2V and 5.5V.
Q: What is the maximum clock frequency supported by SN74AHC74DBR? A: SN74AHC74DBR can support clock frequencies up to 100 MHz.
Q: How many flip-flops are there in SN74AHC74DBR? A: SN74AHC74DBR contains two independent flip-flops, allowing it to store two bits of data.
Q: Can SN74AHC74DBR be used in both synchronous and asynchronous applications? A: Yes, SN74AHC74DBR can be used in both synchronous and asynchronous applications.
Q: What is the setup time requirement for the data input signal? A: The setup time requirement for the data input signal is typically 2 ns.
Q: Does SN74AHC74DBR have any output enable feature? A: No, SN74AHC74DBR does not have an output enable feature. The outputs are always active.
Q: What is the typical propagation delay of SN74AHC74DBR? A: The typical propagation delay of SN74AHC74DBR is around 9 ns.
Q: Can SN74AHC74DBR be used in high-speed applications? A: Yes, SN74AHC74DBR is designed for high-speed operation and can be used in various high-speed applications.
Q: What is the package type of SN74AHC74DBR? A: SN74AHC74DBR is available in a small-outline integrated circuit (SOIC) package with 14 pins.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.