Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
SN65MLVD047ADRG4

SN65MLVD047ADRG4

Product Overview

  • Category: Integrated Circuit
  • Use: LVDS Driver/Receiver
  • Characteristics: High-speed, low-voltage differential signaling
  • Package: SOIC-8
  • Essence: Transmits high-speed digital signals over long distances with minimal noise interference
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 3V to 3.6V
  • Operating Temperature Range: -40°C to 85°C
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 4
  • Input Common Mode Voltage Range: ±1V
  • Output Voltage Swing: 350mV (minimum)
  • Propagation Delay: 2.5ns (typical)

Pin Configuration

The SN65MLVD047ADRG4 has a total of 8 pins arranged as follows:

```


| | --| VCC GND |-- Pin 1: Power supply --| A B |-- Pin 2: Channel A input --| Y Z |-- Pin 3: Channel A output --| C D |-- Pin 4: Channel B input --| YB ZB |-- Pin 5: Channel B output --| RE DE |-- Pin 6: Receiver Enable and Driver Enable --| GND VCC |-- Pin 7: Ground |___________| ```

Functional Features

  • High-speed data transmission using Low-Voltage Differential Signaling (LVDS) technology
  • Supports up to 400 Mbps data rate
  • Provides four independent channels for simultaneous data transmission/reception
  • Wide operating temperature range for versatile applications
  • Low power consumption for energy-efficient operation
  • Built-in receiver and driver enable pins for easy control

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Low noise interference due to differential signaling - Compact SOIC-8 package for space-constrained designs - Wide operating temperature range allows usage in various environments

Disadvantages: - Limited number of channels (4) - Requires external components for complete LVDS system implementation - Relatively higher cost compared to non-LVDS alternatives

Working Principles

The SN65MLVD047ADRG4 is an LVDS driver/receiver integrated circuit designed to transmit high-speed digital signals over long distances with minimal noise interference. It utilizes low-voltage differential signaling, where data is transmitted as a voltage difference between two complementary signals.

The driver section of the IC converts the input digital signals into differential voltage signals, which are then transmitted through the output channels. On the receiving end, the receiver section converts the received differential signals back into digital signals for further processing.

The differential signaling technique employed by LVDS provides several advantages, including high noise immunity, reduced electromagnetic interference, and improved signal integrity.

Detailed Application Field Plans

The SN65MLVD047ADRG4 is commonly used in applications that require high-speed data transmission over long distances while maintaining signal integrity. Some typical application fields include:

  1. Industrial Automation: Used in industrial control systems, PLCs, and motor drives for reliable communication between devices.
  2. Automotive Electronics: Employed in automotive infotainment systems, dashboard displays, and advanced driver-assistance systems (ADAS) for high-speed data transfer.
  3. Medical Equipment: Integrated into medical imaging devices, patient monitoring systems, and diagnostic equipment to ensure accurate and fast data transmission.
  4. Communication Systems: Utilized in telecommunications infrastructure, network switches, and routers for efficient data transfer between network nodes.
  5. Consumer Electronics: Incorporated in high-definition televisions, gaming consoles, and multimedia devices to enable high-speed data transmission between components.

Detailed and Complete Alternative Models

  1. SN65LVDS047ADRG4: Similar LVDS driver/receiver IC with the same pin configuration and characteristics but operates at a lower data rate of up to 200 Mbps.
  2. SN65MLVD204ADRG4: Four-channel LVDS driver/receiver IC with enhanced ESD protection and extended temperature range for rugged industrial applications.
  3. SN65LVDS179DGK: Dual-channel LVDS driver/receiver IC with integrated termination resistors and reduced power consumption for space-constrained designs.

(Note: This is not an exhaustive list of alternative models, and it is recommended to consult the manufacturer's datasheets for a complete selection.)

In conclusion, the SN65MLVD047ADRG4 is a high-speed LVDS driver/receiver IC that enables reliable data transmission over long distances. Its compact package, wide operating temperature range, and differential signaling technology make it suitable for various applications in industries such as industrial automation, automotive electronics, medical equipment, communication systems, and consumer electronics.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SN65MLVD047ADRG4 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of SN65MLVD047ADRG4 in technical solutions:

  1. Q: What is SN65MLVD047ADRG4? A: SN65MLVD047ADRG4 is a quad differential line driver/receiver designed for digital data transmission over balanced lines.

  2. Q: What is the operating voltage range of SN65MLVD047ADRG4? A: The operating voltage range is typically between 3.3V and 5V.

  3. Q: What is the maximum data rate supported by SN65MLVD047ADRG4? A: SN65MLVD047ADRG4 supports a maximum data rate of 200 Mbps.

  4. Q: Can SN65MLVD047ADRG4 be used for long-distance communication? A: Yes, SN65MLVD047ADRG4 is suitable for long-distance communication as it provides robust signal transmission over balanced lines.

  5. Q: Does SN65MLVD047ADRG4 support hot-plugging? A: Yes, SN65MLVD047ADRG4 supports hot-plugging, allowing devices to be connected or disconnected while the system is powered on.

  6. Q: What is the typical power consumption of SN65MLVD047ADRG4? A: The typical power consumption is around 20 mW per channel.

  7. Q: Can SN65MLVD047ADRG4 be used in industrial environments? A: Yes, SN65MLVD047ADRG4 is designed to operate reliably in harsh industrial environments with extended temperature ranges.

  8. Q: Is SN65MLVD047ADRG4 compatible with other LVDS devices? A: Yes, SN65MLVD047ADRG4 is compatible with other LVDS devices, allowing for easy integration into existing systems.

  9. Q: Does SN65MLVD047ADRG4 have built-in protection features? A: Yes, SN65MLVD047ADRG4 includes built-in protection features such as thermal shutdown and short-circuit protection.

  10. Q: What are the typical applications of SN65MLVD047ADRG4? A: SN65MLVD047ADRG4 is commonly used in applications such as industrial automation, motor control, and communication systems requiring high-speed data transmission over long distances.

Please note that these answers are general and may vary depending on specific use cases and requirements.