STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STPIC6C595MTR
Details bekijken DataSheets

STPIC6C595MTR

Product Overview

Category

STPIC6C595MTR belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a shift register and latch in various electronic applications.

Characteristics

  • Serial-in, parallel-out shift register with storage capability
  • High-speed data transfer
  • Low power consumption
  • Wide operating voltage range
  • Compact package size

Package

STPIC6C595MTR is available in a small outline transistor (SOT) package.

Essence

The essence of STPIC6C595MTR lies in its ability to efficiently control multiple outputs using a minimal number of pins.

Packaging/Quantity

This product is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

  • Supply Voltage: 2.3V to 5.5V
  • Maximum Clock Frequency: 25 MHz
  • Number of Outputs: 8
  • Output Current: 100 mA per channel
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. SER (Serial Data Input)
  2. SRCLK (Shift Register Clock Input)
  3. RCLK (Storage Register Clock Input)
  4. OE (Output Enable Input)
  5. GND (Ground)
  6. Q7' (Serial Output)
  7. DS (Serial Data Output)
  8. VCC (Supply Voltage)
  9. Q0-Q7 (Parallel Outputs)

Functional Features

  • Serial-to-parallel data conversion
  • Storage capability for parallel outputs
  • Output enable/disable control
  • Daisy-chaining multiple devices for expanded output capability

Advantages

  • Simplifies circuit design by reducing the number of required pins
  • High-speed data transfer allows for efficient operation
  • Wide operating voltage range enables compatibility with various systems
  • Low power consumption contributes to energy efficiency

Disadvantages

  • Limited number of outputs (8 channels)
  • Requires additional components for extended functionality
  • Sensitive to electrostatic discharge (ESD) and proper handling is necessary

Working Principles

STPIC6C595MTR operates by receiving serial data through the SER pin. The shift register clock (SRCLK) input controls the shifting of data bits into the shift register. The storage register clock (RCLK) input latches the data from the shift register into the storage register, allowing parallel output control. The output enable (OE) input enables or disables the outputs.

Detailed Application Field Plans

STPIC6C595MTR finds applications in various fields, including:

  1. LED matrix displays
  2. Seven-segment displays
  3. Motor control systems
  4. Data communication devices
  5. Industrial automation

Detailed and Complete Alternative Models

  1. TPIC6B595N: Similar shift register and latch IC with 8 outputs
  2. SN74HC595: 8-bit serial-in, parallel-out shift register with 3-state outputs
  3. CD4094BE: 8-stage shift-and-store bus register with tri-state outputs

These alternative models offer similar functionalities and can be used as substitutes for STPIC6C595MTR depending on specific requirements.

Word count: 408 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STPIC6C595MTR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of STPIC6C595MTR in technical solutions:

  1. Q: What is STPIC6C595MTR? A: STPIC6C595MTR is a shift register with output latches and serial input/output that can be used to control multiple outputs in various technical applications.

  2. Q: How many outputs can be controlled using STPIC6C595MTR? A: STPIC6C595MTR has 8 outputs that can be individually controlled.

  3. Q: What is the maximum current rating for each output of STPIC6C595MTR? A: Each output of STPIC6C595MTR can handle a maximum current of 150mA.

  4. Q: Can STPIC6C595MTR be cascaded to control more than 8 outputs? A: Yes, multiple STPIC6C595MTR chips can be cascaded together to control a larger number of outputs.

  5. Q: How is data transferred to STPIC6C595MTR? A: Data is transferred to STPIC6C595MTR using a serial input pin (SER) and clock input pin (SRCLK).

  6. Q: Can STPIC6C595MTR be used with microcontrollers like Arduino? A: Yes, STPIC6C595MTR can be easily interfaced with microcontrollers like Arduino using digital I/O pins.

  7. Q: What is the purpose of the latch enable pin (RCLK) in STPIC6C595MTR? A: The latch enable pin (RCLK) is used to update the outputs simultaneously after shifting in new data.

  8. Q: Can STPIC6C595MTR be used to drive high-power loads like motors or relays? A: No, STPIC6C595MTR is not designed to directly drive high-power loads. It is better suited for driving LEDs, displays, or other low-power devices.

  9. Q: What is the maximum clock frequency that can be used with STPIC6C595MTR? A: The maximum clock frequency for STPIC6C595MTR is typically around 25MHz.

  10. Q: Are there any application examples where STPIC6C595MTR is commonly used? A: Yes, STPIC6C595MTR is commonly used in applications such as LED matrix displays, multiplexed LED control, and general-purpose digital output expansion.

Please note that these answers are general and may vary depending on specific implementation details and requirements.