STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
E-UC3842BD1013TR
Details bekijken DataSheets

E-UC3842BD1013TR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: PWM Controller, Current Mode Control
  • Package: SOIC-8
  • Essence: Regulates and controls the power supply in various electronic devices
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 7.6V to 30V
  • Output Voltage Range: 5V to 20V
  • Maximum Duty Cycle: 50%
  • Operating Temperature Range: -40°C to +85°C
  • Frequency Range: 100kHz to 500kHz
  • Output Current: Up to 1A

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. COMP: Compensation pin for loop stability
  4. CS: Current sense input for current mode control
  5. RT/CT: Timing components connection for frequency control
  6. OUT: Output voltage
  7. FB: Feedback pin for regulating output voltage
  8. SYNC: Synchronization input for multiple ICs

Functional Features

  • Current Mode Control: Provides stable and efficient power regulation by adjusting the duty cycle based on the current sensed.
  • Soft Start: Gradually ramps up the output voltage to prevent excessive inrush current.
  • Overcurrent Protection: Monitors the current flow and shuts down the circuit if it exceeds a certain threshold.
  • Under Voltage Lockout (UVLO): Prevents operation when the input voltage falls below a specified level.
  • Error Amplifier: Compares the feedback voltage with a reference voltage to maintain the desired output voltage.

Advantages and Disadvantages

Advantages: - High efficiency power management - Compact size and easy integration - Wide input voltage range - Comprehensive protection features

Disadvantages: - Limited output current capacity - Requires external components for operation - Sensitivity to noise and voltage fluctuations

Working Principles

The E-UC3842BD1013TR is a Pulse Width Modulation (PWM) controller IC that operates in current mode control. It regulates the power supply by adjusting the duty cycle of the output waveform based on the sensed current. The error amplifier compares the feedback voltage with a reference voltage, and the resulting error signal is used to adjust the duty cycle. This control mechanism ensures stable and efficient power delivery.

Detailed Application Field Plans

  1. Switching Power Supplies: The E-UC3842BD1013TR is commonly used in various switching power supply designs, including AC-DC converters, DC-DC converters, and LED drivers.
  2. Battery Chargers: It can be employed in battery charging circuits to regulate the charging process and protect the batteries from overcharging or excessive current flow.
  3. Motor Control: The IC can be utilized in motor control applications, such as speed control of brushless DC motors or stepper motors.
  4. Audio Amplifiers: It can be integrated into audio amplifier circuits to provide efficient power management for audio devices.

Detailed and Complete Alternative Models

  1. UC3842AN: DIP-8 package, similar specifications and features.
  2. SG3524N: DIP-16 package, wider input voltage range, additional features like dead-time control.
  3. TL494CN: DIP-16 package, higher output current capability, adjustable frequency range.

(Note: These alternative models are provided as examples and may have different pin configurations and specifications. Refer to their respective datasheets for detailed information.)

Word count: 411 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van E-UC3842BD1013TR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of E-UC3842BD1013TR in technical solutions:

  1. Q: What is the E-UC3842BD1013TR? A: The E-UC3842BD1013TR is a specific model of integrated circuit (IC) used for controlling switch-mode power supplies.

  2. Q: What are the main features of the E-UC3842BD1013TR? A: The E-UC3842BD1013TR features a current mode PWM controller, adjustable frequency operation, soft-start capability, and protection functions like overvoltage and overcurrent protection.

  3. Q: How does the E-UC3842BD1013TR control a switch-mode power supply? A: The E-UC3842BD1013TR uses pulse width modulation (PWM) to regulate the output voltage of the power supply by adjusting the duty cycle of the switching signal.

  4. Q: Can the E-UC3842BD1013TR be used in both AC-DC and DC-DC power supply applications? A: Yes, the E-UC3842BD1013TR can be used in both AC-DC and DC-DC power supply applications, making it versatile for various technical solutions.

  5. Q: What is the typical input voltage range for the E-UC3842BD1013TR? A: The typical input voltage range for the E-UC3842BD1013TR is between 8V and 20V.

  6. Q: How can I adjust the output voltage of a power supply using the E-UC3842BD1013TR? A: The output voltage can be adjusted by changing the feedback resistors connected to the FB pin of the E-UC3842BD1013TR.

  7. Q: Does the E-UC3842BD1013TR have any built-in protection features? A: Yes, the E-UC3842BD1013TR has built-in protection features such as overvoltage protection (OVP) and overcurrent protection (OCP).

  8. Q: Can I use the E-UC3842BD1013TR in high-power applications? A: The E-UC3842BD1013TR is typically used in low to medium power applications. For high-power applications, a higher-rated IC may be more suitable.

  9. Q: Are there any application notes or reference designs available for the E-UC3842BD1013TR? A: Yes, the manufacturer of the E-UC3842BD1013TR usually provides application notes and reference designs that can help with the implementation of the IC in various technical solutions.

  10. Q: Where can I purchase the E-UC3842BD1013TR? A: The E-UC3842BD1013TR can be purchased from electronic component distributors, online marketplaces, or directly from the manufacturer's authorized distributors.