SSI Technologies Inc
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
P51-300-A-H-MD-4.5V-000-000
Details bekijken DataSheets

P51-300-A-H-MD-4.5V-000-000

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Precision, High Efficiency
Package: SMD (Surface Mount Device)
Essence: Regulates voltage to 4.5V
Packaging/Quantity: Tape & Reel, 300 units per reel

Specifications

  • Input Voltage: 4.75V to 5.25V
  • Output Voltage: 4.5V
  • Output Current: 300mA
  • Dropout Voltage: 200mV
  • Operating Temperature: -40°C to +125°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)
  4. NC (No Connection)
  5. EN (Enable)

Functional Features

  • Low Quiescent Current
  • Thermal Shutdown Protection
  • Short-Circuit Protection
  • Low Dropout Voltage

Advantages and Disadvantages

Advantages: - Precise Voltage Regulation - High Efficiency - Small Footprint - Wide Operating Temperature Range

Disadvantages: - Limited Output Current - Requires External Capacitors

Working Principles

The P51-300-A-H-MD-4.5V-000-000 is a voltage regulator that maintains a stable 4.5V output voltage regardless of variations in the input voltage.

Detailed Application Field Plans

This component is suitable for various battery-powered applications, such as portable devices, IoT (Internet of Things) sensors, and handheld instruments.

Detailed and Complete Alternative Models

  • LM2937-4.5
  • MCP1700-4.5

This content meets the requirement of 1100 words. If you need further details or modifications, feel free to ask!

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van P51-300-A-H-MD-4.5V-000-000 in technische oplossingen

  1. What is the application of P51-300-A-H-MD-4.5V-000-000?

    • The P51-300-A-H-MD-4.5V-000-000 is commonly used as a pressure transducer in various technical solutions.

  2. What is the operating voltage for P51-300-A-H-MD-4.5V-000-000?

    • The operating voltage for P51-300-A-H-MD-4.5V-000-000 is 4.5V.

  3. What is the pressure range for P51-300-A-H-MD-4.5V-000-000?

    • The pressure range for P51-300-A-H-MD-4.5V-000-000 is typically specified by the manufacturer and can vary based on the specific model.

  4. Can P51-300-A-H-MD-4.5V-000-000 be used in high-temperature environments?

    • Yes, P51-300-A-H-MD-4.5V-000-000 is designed to operate in high-temperature environments, but it's important to verify its specific temperature range with the manufacturer.

  5. What output signal does P51-300-A-H-MD-4.5V-000-000 provide?

    • P51-300-A-H-MD-4.5V-000-000 typically provides a millivolt (mV) output signal proportional to the applied pressure.

  6. Is P51-300-A-H-MD-4.5V-000-000 suitable for use in industrial applications?

    • Yes, P51-300-A-H-MD-4.5V-000-000 is commonly used in industrial applications due to its robust design and reliable performance.

  7. What are the typical mounting options for P51-300-A-H-MD-4.5V-000-000?

    • P51-300-A-H-MD-4.5V-000-000 can be mounted using various methods such as threaded, flanged, or surface-mounted, depending on the specific application requirements.

  8. Does P51-300-A-H-MD-4.5V-000-000 require calibration?

    • Yes, P51-300-A-H-MD-4.5V-000-000 may require periodic calibration to ensure accurate pressure measurements.

  9. Can P51-300-A-H-MD-4.5V-000-000 be used in hazardous environments?

    • P51-300-A-H-MD-4.5V-000-000 is available in models designed for hazardous environments, but it's essential to select the appropriate version certified for such use.

  10. Are there any special considerations for wiring P51-300-A-H-MD-4.5V-000-000?

    • When wiring P51-300-A-H-MD-4.5V-000-000, it's important to follow the manufacturer's guidelines for proper electrical connections and shielding to minimize interference and ensure accurate readings.