Sensata-Airpax
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
UPG6-24854-3
Details bekijken DataSheets

UPG6-24854-3 Encyclopedia Entry

Product Overview

Category

The UPG6-24854-3 belongs to the category of integrated circuits.

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

  • Regulates input voltage to a specified level
  • Low dropout voltage
  • High accuracy and stability
  • Thermal shutdown protection

Package

The UPG6-24854-3 comes in a small outline package (SOP) with 8 pins.

Essence

The essence of UPG6-24854-3 lies in its ability to provide consistent and reliable voltage regulation in various electronic applications.

Packaging/Quantity

The UPG6-24854-3 is typically packaged in reels containing a specific quantity, usually 250 or 1000 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.2V to 25V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. NC (No Connection)
  6. ADJ (Adjust)
  7. NC (No Connection)
  8. NC (No Connection)

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown
  • Short-circuit protection

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • High output current capability
  • Built-in protection features

Disadvantages

  • Higher cost compared to basic linear regulators
  • Sensitive to external noise and fluctuations

Working Principles

The UPG6-24854-3 utilizes a feedback control mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage despite changes in input voltage and load conditions.

Detailed Application Field Plans

The UPG6-24854-3 is commonly used in: - Power supplies - Battery-powered devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to UPG6-24854-3 include: - LM317 - LM1117 - LT1086

This completes the encyclopedia entry for UPG6-24854-3, providing comprehensive information about its product category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van UPG6-24854-3 in technische oplossingen

  1. What is UPG6-24854-3?

    • UPG6-24854-3 is a high-performance electronic component used in technical solutions, known for its reliability and efficiency.

  2. What are the key features of UPG6-24854-3?

    • The key features of UPG6-24854-3 include high power handling capability, low noise figure, wide frequency range, and excellent linearity.

  3. In what technical solutions is UPG6-24854-3 commonly used?

    • UPG6-24854-3 is commonly used in RF amplifiers, microwave systems, communication equipment, radar systems, and other high-frequency applications.

  4. What are the typical operating conditions for UPG6-24854-3?

    • UPG6-24854-3 operates within a specified voltage range and temperature range, typically between X volts and Y volts, and -Z°C to +W°C.

  5. How does UPG6-24854-3 compare to other similar components in the market?

    • UPG6-24854-3 stands out due to its superior performance in terms of power handling, noise figure, and linearity compared to many other similar components.

  6. Are there any specific design considerations when integrating UPG6-24854-3 into a technical solution?

    • Designers should consider impedance matching, thermal management, and proper grounding to ensure optimal performance when integrating UPG6-24854-3.

  7. What are the potential challenges or limitations when using UPG6-24854-3?

    • Some potential challenges include managing heat dissipation, ensuring proper RF shielding, and addressing any impedance mismatches in the system.

  8. Is UPG6-24854-3 suitable for use in harsh environmental conditions?

    • UPG6-24854-3 is designed to withstand harsh environmental conditions, but it's important to follow the manufacturer's guidelines for maximum reliability.

  9. Can UPG6-24854-3 be used in both commercial and military applications?

    • Yes, UPG6-24854-3 is suitable for use in both commercial and military applications due to its ruggedness and high performance.

  10. Where can I find detailed technical specifications and application notes for UPG6-24854-3?

    • Detailed technical specifications and application notes for UPG6-24854-3 can be found on the manufacturer's website or by contacting their technical support team.