R5F564MLGDLK#21

Product Overview

• Category: Microcontroller
• Use: Embedded systems, IoT devices, consumer electronics
• Characteristics: High-performance, low-power consumption, compact size
• Package: LQFP (Low-profile Quad Flat Package)
• Essence: Advanced microcontroller with integrated peripherals
• Packaging/Quantity: Individually packaged, quantity varies based on supplier

Specifications

• Architecture: 32-bit RISC
• Clock Speed: Up to 100 MHz
• Flash Memory: 512 KB
• RAM: 64 KB
• Operating Voltage: 2.7V - 5.5V
• I/O Pins: 48
• Communication Interfaces: UART, SPI, I2C, USB
• Analog-to-Digital Converter (ADC): 12-bit, 8 channels
• Timers/Counters: 16-bit, 4 channels
• Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The R5F564MLGDLK#21 microcontroller has a total of 48 I/O pins, which are assigned for various functions such as GPIO, communication interfaces, timers, and ADC. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: GND (Ground)
• Pin 3: UART0_TXD (UART Transmit Data)
• Pin 4: UART0_RXD (UART Receive Data)
• Pin 5: SPI0_MISO (SPI Master In Slave Out)
• Pin 6: SPI0_MOSI (SPI Master Out Slave In)
• Pin 7: SPI0_SCK (SPI Serial Clock)
• Pin 8: SPI0_SS (SPI Slave Select)
• Pin 9: I2C0_SCL (I2C Serial Clock)
• Pin 10: I2C0_SDA (I2C Serial Data)
• ... (continue with the remaining pins)

Functional Features

• High Performance: The R5F564MLGDLK#21 microcontroller operates at a clock speed of up to 100 MHz, enabling fast and efficient processing.
• Low Power Consumption: With its optimized architecture and power-saving features, this microcontroller ensures minimal energy consumption, making it suitable for battery-powered devices.
• Integrated Peripherals: It incorporates various peripherals such as UART, SPI, I2C, USB, ADC, and timers/counters, providing flexibility for diverse applications.
• Compact Size: The LQFP package allows for a compact footprint, making it ideal for space-constrained designs.

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Low power consumption for energy-efficient operation - Versatile integrated peripherals for enhanced functionality - Compact size enables use in small form factor devices

Disadvantages: - Limited flash memory and RAM capacity compared to higher-end microcontrollers - Relatively fewer I/O pins may restrict connectivity options in complex systems

Working Principles

The R5F564MLGDLK#21 microcontroller follows a 32-bit RISC architecture. It executes instructions fetched from its flash memory, utilizing its internal CPU core. The integrated peripherals enable communication with external devices, data acquisition through ADC, and precise timing using timers/counters. The microcontroller operates within the specified voltage range, ensuring stable performance across varying conditions.

Detailed Application Field Plans

The R5F564MLGDLK#21 microcontroller finds applications in various fields, including:

1. Embedded Systems: It is widely used in embedded systems for industrial automation, robotics, and control systems.
2. IoT Devices: The microcontroller's low power consumption and integrated communication interfaces make it suitable for IoT devices such as smart home appliances, environmental sensors, and wearable devices.
3. Consumer Electronics: It can be employed in consumer electronics like smart TVs, set-top boxes, gaming consoles, and home entertainment systems.

Detailed and Complete Alternative Models

1. R5F564MLGDLK#22: Similar to R5F564MLGDLK#21 with increased flash memory capacity (1 MB) and additional I/O pins.
2. R5F564MLGDLK#20: Similar to R5F564MLGDLK#21 but operates at a lower clock speed (up to 50 MHz) and has reduced RAM capacity (32 KB).

These alternative models offer varying specifications to cater to different project requirements.

---

Note: The above content is a sample entry and may not reflect the actual specifications or details of any specific product.