ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
NCP1608BDR2G
Details bekijken DataSheets

NCP1608BDR2G

Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Low standby power consumption - Wide input voltage range - Overvoltage protection - Overcurrent protection

Package: SOIC-8

Essence: Switching Regulator Controller

Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 25V
  • Output Voltage Range: 0.8V to 20V
  • Maximum Output Current: 1.5A
  • Switching Frequency: 100kHz to 500kHz
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The NCP1608BDR2G has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Supply Voltage Input | | 2 | GND | Ground | | 3 | FB | Feedback Input | | 4 | COMP | Compensation Node | | 5 | CS | Current Sense Input | | 6 | SS/TR | Soft-Start/Tracking Input | | 7 | EN | Enable Input | | 8 | SW | Switch Node |

Functional Features

  • Constant output voltage regulation
  • Overvoltage protection
  • Overcurrent protection
  • Soft-start function for controlled startup
  • Adjustable switching frequency
  • Error amplifier for precise feedback control

Advantages

  • High efficiency conversion
  • Compact size and low profile package
  • Wide input voltage range allows for versatile applications
  • Robust overvoltage and overcurrent protection
  • Soft-start feature prevents inrush current

Disadvantages

  • Limited maximum output current (1.5A)
  • Requires external components for complete power supply design
  • Not suitable for high-power applications

Working Principles

The NCP1608BDR2G is a switching regulator controller that operates by converting the input voltage into a regulated output voltage. It utilizes a pulse width modulation (PWM) technique to control the duty cycle of the switching transistor, which in turn regulates the output voltage. The feedback loop continuously monitors the output voltage and adjusts the duty cycle to maintain a constant voltage level.

Detailed Application Field Plans

The NCP1608BDR2G is commonly used in various power management applications, including but not limited to: - Battery-powered devices - Consumer electronics - Industrial equipment - LED lighting systems - Telecom infrastructure

Detailed and Complete Alternative Models

  • NCP1608ADR2G
  • NCP1608BDR2G
  • NCP1608BDR2G-A
  • NCP1608BDR2G-B
  • NCP1608BDR2G-C

These alternative models offer similar functionality and specifications, providing flexibility for different design requirements.

In conclusion, the NCP1608BDR2G is a versatile switching regulator controller that offers high efficiency, low standby power consumption, and various protection features. Its compact size and wide input voltage range make it suitable for a wide range of power management applications. However, its limited maximum output current and requirement for external components should be considered when designing high-power systems.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van NCP1608BDR2G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of NCP1608BDR2G in technical solutions:

  1. Q: What is the NCP1608BDR2G? A: The NCP1608BDR2G is a high-performance, fixed-frequency current-mode controller IC used for power supply applications.

  2. Q: What are the key features of the NCP1608BDR2G? A: The key features include wide input voltage range, adjustable switching frequency, integrated protection features, and low standby power consumption.

  3. Q: What is the typical application of the NCP1608BDR2G? A: The NCP1608BDR2G is commonly used in offline flyback converters, LED lighting applications, and other low-power AC-DC power supplies.

  4. Q: What is the maximum input voltage supported by the NCP1608BDR2G? A: The NCP1608BDR2G can handle input voltages up to 700V.

  5. Q: How do I set the switching frequency of the NCP1608BDR2G? A: The switching frequency can be adjusted using an external resistor connected to the RT pin of the IC.

  6. Q: Does the NCP1608BDR2G have built-in protection features? A: Yes, the NCP1608BDR2G includes features like overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown.

  7. Q: Can the NCP1608BDR2G operate in a wide temperature range? A: Yes, the NCP1608BDR2G has a wide operating temperature range of -40°C to +125°C.

  8. Q: What is the maximum output power that can be achieved with the NCP1608BDR2G? A: The maximum output power depends on the specific application and design, but it can typically support power levels up to 10W.

  9. Q: Is the NCP1608BDR2G suitable for dimmable LED lighting applications? A: Yes, the NCP1608BDR2G can be used in dimmable LED lighting applications by incorporating additional circuitry for dimming control.

  10. Q: Are there any reference designs or application notes available for the NCP1608BDR2G? A: Yes, ON Semiconductor provides reference designs and application notes that can help in designing with the NCP1608BDR2G. These resources can be found on their website.

Please note that these answers are general and may vary depending on the specific requirements of your technical solution.