ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MC14504BFELG
Details bekijken DataSheets

MC14504BFELG

Product Overview

  • Category: Integrated Circuit
  • Use: Logic Gate
  • Characteristics: High-speed, low-power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Hex Schmitt Trigger
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 3V to 18V
  • Input Voltage: -0.5V to VDD + 0.5V
  • Operating Temperature: -40°C to +85°C
  • Propagation Delay: 20ns (typical)
  • Output Current: ±4mA
  • Logic Family: CMOS

Detailed Pin Configuration

The MC14504BFELG has a total of 14 pins. The pin configuration is as follows:

  1. Pin 1: Input A
  2. Pin 2: Output A
  3. Pin 3: Input B
  4. Pin 4: Output B
  5. Pin 5: Input C
  6. Pin 6: Output C
  7. Pin 7: Ground (GND)
  8. Pin 8: Power Supply (VDD)
  9. Pin 9: Input D
  10. Pin 10: Output D
  11. Pin 11: Input E
  12. Pin 12: Output E
  13. Pin 13: Input F
  14. Pin 14: Output F

Functional Features

  • Hex Schmitt Trigger with inverting outputs
  • Wide supply voltage range allows for versatile applications
  • High noise immunity due to Schmitt trigger input
  • Low power consumption makes it suitable for battery-powered devices
  • Fast propagation delay enables high-speed operation

Advantages and Disadvantages

Advantages:

  • High-speed operation
  • Low power consumption
  • Wide supply voltage range
  • Schmitt trigger input for noise immunity

Disadvantages:

  • Inverting outputs may require additional circuitry for certain applications
  • Limited output current capacity

Working Principles

The MC14504BFELG is a Hex Schmitt Trigger integrated circuit. It consists of six individual Schmitt trigger gates, each with an inverting output. The Schmitt trigger input allows for hysteresis, making the circuit less sensitive to noise and providing better noise immunity. The device operates over a wide supply voltage range and consumes low power, making it suitable for various logic gate applications.

Detailed Application Field Plans

The MC14504BFELG can be used in various applications, including but not limited to:

  1. Digital signal processing
  2. Data communication systems
  3. Industrial automation
  4. Automotive electronics
  5. Consumer electronics
  6. Medical devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the MC14504BFELG are:

  1. CD40106BE: Hex Schmitt Trigger, non-inverting outputs
  2. SN74LS14N: Hex Schmitt Trigger, inverting outputs, TTL logic family
  3. 74HC14: Hex Schmitt Trigger, inverting outputs, CMOS logic family
  4. HEF4093BP: Quad 2-input NAND Schmitt Trigger, inverting outputs

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 314 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MC14504BFELG in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MC14504BFELG in technical solutions:

  1. Q: What is MC14504BFELG? A: MC14504BFELG is a hex level shifter IC (Integrated Circuit) commonly used for voltage level translation in digital circuits.

  2. Q: What is the voltage range supported by MC14504BFELG? A: MC14504BFELG supports a wide voltage range from 3V to 18V, making it suitable for various applications.

  3. Q: How many channels does MC14504BFELG have? A: MC14504BFELG has six independent channels, allowing for simultaneous level shifting of multiple signals.

  4. Q: Can MC14504BFELG be used bidirectionally? A: No, MC14504BFELG is unidirectional and can only shift voltage levels from low to high or high to low.

  5. Q: What is the maximum data rate supported by MC14504BFELG? A: MC14504BFELG can handle data rates up to 10 MHz, making it suitable for most digital communication protocols.

  6. Q: Is MC14504BFELG compatible with both CMOS and TTL logic levels? A: Yes, MC14504BFELG is compatible with both CMOS (Complementary Metal-Oxide-Semiconductor) and TTL (Transistor-Transistor Logic) logic levels.

  7. Q: Can MC14504BFELG be cascaded to achieve higher voltage translation levels? A: Yes, MC14504BFELG can be cascaded to achieve higher voltage translation levels by connecting the output of one chip to the input of another.

  8. Q: What is the power supply voltage required for MC14504BFELG? A: MC14504BFELG requires a power supply voltage between 3V and 18V, typically supplied by a regulated DC power source.

  9. Q: Can MC14504BFELG be used in battery-powered applications? A: Yes, MC14504BFELG can be used in battery-powered applications as it has low power consumption and supports a wide voltage range.

  10. Q: What are some common applications of MC14504BFELG? A: MC14504BFELG is commonly used in various technical solutions such as level shifting in communication interfaces, interfacing different logic families, and voltage translation in mixed-signal systems.

Please note that these questions and answers are general and may vary depending on specific use cases and requirements.