ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MC10E175FN
Details bekijken DataSheets

MC10E175FN

Product Overview

Category

MC10E175FN belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for signal processing and data transmission.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Excellent noise immunity

Package

MC10E175FN is available in a standard 16-pin dual in-line package (DIP).

Essence

The essence of MC10E175FN lies in its ability to process and transmit digital signals efficiently and reliably.

Packaging/Quantity

MC10E175FN is typically packaged in reels or tubes, with quantities varying depending on customer requirements.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input Logic Levels: TTL/CMOS compatible
  • Output Logic Levels: ECL compatible
  • Maximum Clock Frequency: 1.5 GHz
  • Propagation Delay: 1.2 ns

Detailed Pin Configuration

  1. CLK (Clock Input)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. Q0 (Output 0)
  11. Q1 (Output 1)
  12. Q2 (Output 2)
  13. Q3 (Output 3)
  14. Q4 (Output 4)
  15. Q5 (Output 5)
  16. VCC (Power Supply)

Functional Features

  • Parallel-to-Serial Conversion
  • High-Speed Data Transmission
  • Synchronous Operation
  • Edge-Triggered Clocking

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data processing.
  • Low power consumption helps conserve energy.
  • Wide operating voltage range allows for compatibility with various systems.
  • Excellent noise immunity ensures reliable signal transmission.

Disadvantages

  • Limited availability of alternative models may restrict design flexibility.
  • Higher cost compared to some other ICs with similar functionality.

Working Principles

MC10E175FN operates based on parallel-to-serial conversion. It takes multiple parallel input data signals and converts them into a single serial output stream. The clock input synchronizes the conversion process, ensuring accurate and reliable data transmission.

Detailed Application Field Plans

MC10E175FN finds applications in various fields, including: 1. Telecommunications: Used in high-speed data communication systems. 2. Networking: Employed in network switches and routers for efficient data processing. 3. Test and Measurement: Utilized in equipment for signal analysis and data acquisition. 4. Industrial Automation: Integrated into control systems for precise data handling.

Detailed and Complete Alternative Models

  1. MC100EP175FN: Similar functionality with enhanced performance characteristics.
  2. MC10175FN: Lower-cost alternative with slightly reduced specifications.
  3. MC10ELT21FN: Differential version offering improved noise immunity.

Note: This is not an exhaustive list, and there are several other alternative models available in the market.

Word count: 440 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MC10E175FN in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MC10E175FN in technical solutions:

  1. Q: What is MC10E175FN? A: MC10E175FN is a specific type of integrated circuit (IC) that belongs to the ECLinPS™ family of high-speed logic devices.

  2. Q: What are the key features of MC10E175FN? A: MC10E175FN offers differential inputs, differential outputs, and operates at very high speeds, making it suitable for demanding applications.

  3. Q: What is the typical operating voltage range for MC10E175FN? A: The typical operating voltage range for MC10E175FN is between -4.2V and -5.7V.

  4. Q: Can MC10E175FN be used in low-power applications? A: No, MC10E175FN is not designed for low-power applications as it consumes relatively higher power due to its high-speed operation.

  5. Q: What are some common applications of MC10E175FN? A: MC10E175FN is commonly used in high-speed data communication systems, clock distribution networks, and other applications requiring precise timing.

  6. Q: Does MC10E175FN support single-ended inputs/outputs? A: No, MC10E175FN only supports differential inputs and outputs, which provide better noise immunity and signal integrity.

  7. Q: What is the maximum operating frequency of MC10E175FN? A: The maximum operating frequency of MC10E175FN is typically around 1.5 GHz.

  8. Q: Can MC10E175FN tolerate wide temperature ranges? A: Yes, MC10E175FN is designed to operate reliably over a wide temperature range, typically from -40°C to +85°C.

  9. Q: Are there any specific precautions to consider when using MC10E175FN? A: It is important to follow the recommended power supply sequencing and decoupling guidelines provided in the datasheet to ensure proper operation.

  10. Q: Is MC10E175FN available in different package options? A: Yes, MC10E175FN is available in various package options, such as 28-pin PLCC and 28-pin TSSOP, allowing flexibility in board design and integration.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of MC10E175FN.