ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
FSD200BMX
Details bekijken DataSheets

FSD200BMX

Product Overview

Category

FSD200BMX belongs to the category of integrated circuits (ICs).

Use

It is primarily used in power supply applications.

Characteristics

  • FSD200BMX is a high-performance, low-cost power switch.
  • It offers excellent thermal performance and efficiency.
  • The device operates at a wide input voltage range.
  • It provides protection against overcurrent and overvoltage conditions.

Package

FSD200BMX is available in a compact and industry-standard package.

Essence

The essence of FSD200BMX lies in its ability to efficiently regulate and control power supply in various applications.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 85V - 265V AC
  • Output Power: Up to 10W
  • Operating Temperature Range: -40°C to +105°C
  • Switching Frequency: 65kHz
  • Standby Power Consumption: <50mW

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. CS: Current sense pin
  5. EN: Enable pin for device activation
  6. D: Drain pin for power switching
  7. S: Source pin for power switching

Functional Features

  • Overcurrent Protection: Automatically shuts down the device in case of excessive current flow.
  • Overvoltage Protection: Safeguards the circuit from voltage spikes or surges.
  • Soft Start: Ensures a smooth and controlled startup of the power supply.
  • Frequency Jittering: Reduces electromagnetic interference (EMI) emissions.
  • Auto Restart: Automatically resumes operation after a fault condition is resolved.

Advantages and Disadvantages

Advantages

  • High efficiency and thermal performance.
  • Wide input voltage range allows for versatile applications.
  • Compact package size saves board space.
  • Built-in protection features enhance system reliability.

Disadvantages

  • Limited output power capacity (up to 10W).
  • Requires external components for complete power supply implementation.

Working Principles

FSD200BMX operates on the principle of pulse width modulation (PWM). It regulates the output voltage by controlling the duty cycle of the switching signal. The device monitors the feedback voltage and adjusts the duty cycle accordingly to maintain a stable output.

Detailed Application Field Plans

FSD200BMX finds extensive use in various power supply applications, including but not limited to: - AC-DC converters - LED lighting systems - Home appliances - Industrial equipment - Consumer electronics

Detailed and Complete Alternative Models

  1. FSD210: Similar to FSD200BMX with enhanced output power capability (up to 20W).
  2. FSD220: Higher voltage rating variant suitable for specific applications.
  3. FSD230: Lower cost alternative with reduced feature set.

These alternative models offer similar functionality and can be considered based on specific project requirements.

In conclusion, FSD200BMX is a high-performance power switch integrated circuit used in power supply applications. Its compact size, wide input voltage range, and built-in protection features make it an ideal choice for various industries. However, its limited output power capacity and requirement for external components should be taken into consideration during design implementation.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van FSD200BMX in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of FSD200BMX in technical solutions:

  1. Q: What is FSD200BMX? A: FSD200BMX is a high-performance integrated circuit (IC) used for power management in various technical solutions.

  2. Q: What are the key features of FSD200BMX? A: FSD200BMX offers features like high efficiency, low standby power consumption, overvoltage protection, thermal shutdown, and short-circuit protection.

  3. Q: In which applications can FSD200BMX be used? A: FSD200BMX can be used in applications such as LED lighting, power adapters, industrial control systems, and consumer electronics.

  4. Q: How does FSD200BMX help in power management? A: FSD200BMX efficiently regulates and controls the power supply, ensuring stable voltage output and protecting the system from voltage fluctuations or faults.

  5. Q: Can FSD200BMX handle high power loads? A: Yes, FSD200BMX is designed to handle high power loads, making it suitable for applications that require efficient power management.

  6. Q: Does FSD200BMX support multiple input voltages? A: Yes, FSD200BMX supports a wide range of input voltages, allowing flexibility in different power supply scenarios.

  7. Q: Is FSD200BMX easy to integrate into existing systems? A: Yes, FSD200BMX comes in a compact package and offers a simple interface, making it relatively easy to integrate into existing systems.

  8. Q: Does FSD200BMX have any built-in protection mechanisms? A: Yes, FSD200BMX includes built-in protection mechanisms like overvoltage protection, thermal shutdown, and short-circuit protection to safeguard the system.

  9. Q: Can FSD200BMX operate in harsh environments? A: Yes, FSD200BMX is designed to operate reliably in a wide temperature range and can withstand harsh environmental conditions.

  10. Q: Are there any application notes or reference designs available for FSD200BMX? A: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement FSD200BMX effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and documentation provided by the manufacturer of FSD200BMX.