Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
74ABT573CSC

Encyclopedia Entry: 74ABT573CSC

Product Overview

Category

The 74ABT573CSC belongs to the category of integrated circuits (ICs) and specifically falls under the family of octal transparent latch with 3-state outputs.

Use

This IC is commonly used in digital systems for storing and transferring data. It acts as a latch, allowing data to be temporarily stored and then released when required.

Characteristics

  • Octal transparent latch with 3-state outputs
  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger action on all inputs
  • ESD protection on all inputs and outputs

Package

The 74ABT573CSC is available in a small outline package (SO) with a surface mount option. The package provides protection and easy integration into electronic circuit boards.

Essence

The essence of the 74ABT573CSC lies in its ability to store and transfer data efficiently within digital systems. It offers high-speed operation and low power consumption, making it suitable for various applications.

Packaging/Quantity

The 74ABT573CSC is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer and supplier.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Current: ±32mA
  • Propagation Delay Time: 6ns (max)
  • Output Capacitance: 10pF (typ)

Detailed Pin Configuration

The 74ABT573CSC has a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. D0 - Data Input 0
  2. D1 - Data Input 1
  3. D2 - Data Input 2
  4. D3 - Data Input 3
  5. D4 - Data Input 4
  6. D5 - Data Input 5
  7. D6 - Data Input 6
  8. D7 - Data Input 7
  9. GND - Ground
  10. OE - Output Enable
  11. LE - Latch Enable
  12. Q0 - Output 0
  13. Q1 - Output 1
  14. Q2 - Output 2
  15. Q3 - Output 3
  16. Q4 - Output 4
  17. Q5 - Output 5
  18. Q6 - Output 6
  19. Q7 - Output 7
  20. VCC - Supply Voltage

Functional Features

The 74ABT573CSC offers the following functional features:

  • Octal transparent latch with 3-state outputs: Allows data to be stored and released when required.
  • Schmitt-trigger action on all inputs: Provides noise immunity and ensures reliable operation.
  • ESD protection on all inputs and outputs: Protects the IC from electrostatic discharge, enhancing its durability.

Advantages and Disadvantages

Advantages

  • High-speed operation: Enables efficient data transfer within digital systems.
  • Low power consumption: Helps conserve energy and prolong battery life in portable devices.
  • Wide operating voltage range: Offers flexibility in various applications.
  • ESD protection: Enhances the reliability and lifespan of the IC.

Disadvantages

  • Limited output current: May not be suitable for applications requiring higher current levels.
  • Propagation delay time: Although minimal, it can affect timing-sensitive applications.

Working Principles

The 74ABT573CSC operates by latching the input data when the latch enable (LE) signal is active. The output enable (OE) signal controls the state of the outputs, allowing them to be either active or in a high-impedance state. When the OE signal is active, the stored data is available at the outputs.

Detailed Application Field Plans

The 74ABT573CSC finds applications in various digital systems, including but not limited to:

  1. Microcontrollers and microprocessors
  2. Data storage devices
  3. Communication systems
  4. Industrial automation
  5. Automotive electronics

Detailed and Complete Alternative Models

There are several alternative models available that offer similar functionality to the 74ABT573CSC. Some notable alternatives include:

  1. 74HC573: A CMOS-based octal transparent latch with 3-state outputs.
  2. SN74LS373: A TTL-based octal transparent latch with 3-state outputs.
  3. CD40107B: A CMOS-based dual 4-bit static shift register.

These alternative models can be considered based on specific requirements and compatibility with existing systems.

In conclusion

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 74ABT573CSC in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of 74ABT573CSC in technical solutions:

  1. Q: What is the function of the 74ABT573CSC? A: The 74ABT573CSC is an octal transparent latch with 3-state outputs. It can be used to store and control the flow of data in a digital circuit.

  2. Q: What is the maximum operating voltage for the 74ABT573CSC? A: The maximum operating voltage for the 74ABT573CSC is typically 5.5V.

  3. Q: How many bits can the 74ABT573CSC latch? A: The 74ABT573CSC can latch 8 bits of data.

  4. Q: Can the 74ABT573CSC be cascaded to latch more than 8 bits? A: Yes, multiple 74ABT573CSC latches can be cascaded together to latch more than 8 bits of data.

  5. Q: What is the purpose of the 3-state outputs on the 74ABT573CSC? A: The 3-state outputs allow the outputs of the latch to be disabled or put into a high-impedance state, which can be useful for bus sharing or multiplexing applications.

  6. Q: What is the typical propagation delay of the 74ABT573CSC? A: The typical propagation delay of the 74ABT573CSC is around 5 ns.

  7. Q: Can the 74ABT573CSC be used in both synchronous and asynchronous applications? A: Yes, the 74ABT573CSC can be used in both synchronous and asynchronous applications, depending on the control signals used.

  8. Q: What is the power supply voltage range for the 74ABT573CSC? A: The power supply voltage range for the 74ABT573CSC is typically between 4.5V and 5.5V.

  9. Q: Can the 74ABT573CSC handle high-speed data transfers? A: Yes, the 74ABT573CSC is designed to operate at high speeds and can handle fast data transfers.

  10. Q: Are there any specific precautions to take when using the 74ABT573CSC? A: It is important to ensure that the power supply and ground connections are properly made, and to follow the recommended operating conditions provided in the datasheet to avoid any potential issues with the device.

Please note that these answers are general and may vary depending on the specific implementation and datasheet of the 74ABT573CSC.