Zie specificaties voor productdetails.
SC18IS603IPW,112
Product Overview
Category
The SC18IS603IPW,112 belongs to the category of integrated circuits (ICs).
Use
This product is commonly used for serial communication applications.
Characteristics
- The SC18IS603IPW,112 is a versatile IC that enables easy conversion between I2C-bus and SPI interfaces.
- It supports both master and slave modes of operation.
- This IC offers high-speed data transfer rates, making it suitable for various communication protocols.
- It operates at low power consumption levels, ensuring energy efficiency.
Package
The SC18IS603IPW,112 comes in a small outline package (SOP) with 20 pins.
Essence
The essence of this product lies in its ability to provide seamless integration between I2C-bus and SPI interfaces, simplifying communication between different devices.
Packaging/Quantity
The SC18IS603IPW,112 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Supply voltage: 1.8V to 3.6V
- Operating temperature range: -40°C to +85°C
- Maximum clock frequency: 3.4 MHz
- Number of I2C-bus/SPI channels: 1
- Supported I2C-bus speeds: Standard mode (100 kHz), Fast mode (400 kHz), Fast mode plus (up to 1 MHz)
- Supported SPI modes: Mode 0 and Mode 3
Detailed Pin Configuration
Pin | Name | Function --- | ---- | -------- 1 | VDD | Power supply 2 | SDA | I2C-bus data input/output 3 | SCL | I2C-bus clock input 4 | CS | Chip select input for SPI mode 5 | SDO | SPI data output 6 | SDI | SPI data input 7 | SCLK | SPI clock input 8 | GND | Ground 9-20| NC | No connection
Functional Features
- Bidirectional level shifting between I2C-bus and SPI interfaces.
- Supports both 7-bit and 10-bit addressing modes for I2C-bus communication.
- Configurable interrupt output pin for event notification.
- Programmable clock frequency for SPI interface.
- Built-in oscillator for generating internal clock signals.
Advantages and Disadvantages
Advantages
- Seamless integration between I2C-bus and SPI interfaces.
- High-speed data transfer rates.
- Low power consumption.
- Versatile operation modes (master/slave).
- Wide operating voltage range.
Disadvantages
- Limited number of I2C-bus/SPI channels (only one channel).
- Relatively small package size, which may require careful handling during assembly.
Working Principles
The SC18IS603IPW,112 functions as a bridge between devices using the I2C-bus and SPI interfaces. It converts the serial data received from the I2C-bus into SPI-compatible format and vice versa. The bidirectional level shifting capability ensures seamless communication between devices operating at different voltage levels. The IC's internal logic handles the protocol conversion and timing synchronization, allowing for efficient data transfer.
Detailed Application Field Plans
The SC18IS603IPW,112 finds applications in various fields, including but not limited to:
- Industrial automation: Enables communication between I2C-based sensors and SPI-based control systems.
- Consumer electronics: Facilitates connectivity between I2C-enabled peripherals and SPI-driven microcontrollers.
- Automotive systems: Allows integration of I2C-based sensors with SPI-based automotive control units.
- Internet of Things (IoT): Enables seamless communication between I2C and SPI devices in IoT applications.
Detailed and Complete Alternative Models
- SC18IS602BIPW,112: Similar to SC18IS603IPW,112 but with two I2C-bus/SPI channels.
- SC18IS601BIPW,112: Single-channel version with reduced pin count.
- SC18IS604BIPW,112: Enhanced version with additional features, such as interrupt handling capabilities.
These alternative models offer similar functionality with slight variations in terms of channel count, pin configuration, and additional features.
Word count: 566 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SC18IS603IPW,112 in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of SC18IS603IPW,112 in technical solutions:
Q: What is SC18IS603IPW,112? A: SC18IS603IPW,112 is a bridge IC that provides an I2C-bus/SPI interface between a microcontroller and multiple peripheral devices.
Q: What are the key features of SC18IS603IPW,112? A: Some key features include support for I2C-bus/SPI conversion, multiple slave device addressing, clock stretching, and interrupt output.
Q: How many peripheral devices can be connected using SC18IS603IPW,112? A: SC18IS603IPW,112 supports up to 8 slave devices on the I2C-bus or SPI bus.
Q: Can SC18IS603IPW,112 be used with both I2C and SPI interfaces? A: Yes, SC18IS603IPW,112 can be configured to work as an I2C-to-SPI or SPI-to-I2C converter based on the application requirements.
Q: What voltage levels does SC18IS603IPW,112 support? A: SC18IS603IPW,112 supports both 3.3V and 5V logic levels.
Q: Is SC18IS603IPW,112 compatible with all microcontrollers? A: SC18IS603IPW,112 is compatible with most microcontrollers that support I2C or SPI communication protocols.
Q: Can SC18IS603IPW,112 handle clock stretching during data transfer? A: Yes, SC18IS603IPW,112 supports clock stretching to ensure proper synchronization between the microcontroller and peripheral devices.
Q: Does SC18IS603IPW,112 have any built-in interrupt capabilities? A: Yes, SC18IS603IPW,112 has an interrupt output pin that can be used to notify the microcontroller about events or data availability.
Q: Can SC18IS603IPW,112 operate in a low-power mode? A: Yes, SC18IS603IPW,112 supports a low-power mode where it consumes minimal power when not actively transferring data.
Q: Are there any application examples for SC18IS603IPW,112? A: Yes, SC18IS603IPW,112 can be used in various applications such as industrial automation, IoT devices, sensor networks, and more.
Please note that the answers provided here are general and may vary based on the specific implementation and requirements of your technical solution.