NXP USA Inc.
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
74ABT241N,602
Details bekijken DataSheets

Encyclopedia Entry: 74ABT241N,602

Product Overview

Category

The 74ABT241N,602 belongs to the category of integrated circuits (ICs) and specifically falls under the family of ABT series logic devices.

Use

This product is commonly used in digital electronic systems for signal buffering and line driving purposes. It acts as a non-inverting buffer with 3-state outputs, making it suitable for various applications.

Characteristics

  • Non-inverting buffer with 3-state outputs
  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger action on all inputs
  • Balanced propagation delays
  • Symmetrical output impedance

Package

The 74ABT241N,602 is available in a standard 20-pin plastic dual in-line package (DIP). The package provides protection and easy integration into circuit boards.

Essence

The essence of this product lies in its ability to provide efficient signal buffering and line driving capabilities, ensuring reliable and accurate data transmission within digital electronic systems.

Packaging/Quantity

The 74ABT241N,602 is typically packaged in reels or tubes, containing a quantity of 25 individual units per package.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 6 ns
  • Maximum Quiescent Current: 10 μA

Detailed Pin Configuration

The 74ABT241N,602 has a total of 20 pins, each serving a specific function within the integrated circuit. The pin configuration is as follows:

  1. Output Enable (OE)
  2. Input A1
  3. Input B1
  4. Input A2
  5. Input B2
  6. Input A3
  7. Input B3
  8. Ground (GND)
  9. Output Y1
  10. Output Y2
  11. Output Y3
  12. Output Y4
  13. VCC
  14. Input A4
  15. Input B4
  16. Input A5
  17. Input B5
  18. Input A6
  19. Input B6
  20. Output Y5

Functional Features

  • Non-inverting buffer: The 74ABT241N,602 provides a non-inverting buffer function, ensuring that the output signal faithfully reproduces the input signal.
  • 3-state outputs: The device offers 3-state outputs, allowing for high impedance when disabled, enabling multiple devices to share a common bus without interference.
  • Schmitt-trigger action: All inputs of the IC employ Schmitt-trigger action, providing hysteresis and improving noise immunity.

Advantages and Disadvantages

Advantages

  • High-speed operation: The 74ABT241N,602 operates at high speeds, making it suitable for time-critical applications.
  • Low power consumption: The device consumes low power, contributing to energy efficiency in electronic systems.
  • Wide operating voltage range: It can operate within a wide voltage range, accommodating various system requirements.
  • Balanced propagation delays: The IC ensures balanced propagation delays across all outputs, maintaining synchronization.

Disadvantages

  • Limited number of outputs: The 74ABT241N,602 has a limited number of outputs, which may restrict its use in certain applications requiring more output channels.
  • Temperature limitations: The operating temperature range is limited to -40°C to +85°C, which may not be suitable for extreme environments.

Working Principles

The 74ABT241N,602 functions as a buffer by amplifying and transmitting digital signals from its inputs to the outputs. When the output enable (OE) pin is active, the input signals are passed through without any inversion. The 3-state outputs allow for high impedance when disabled, preventing signal interference.

Detailed Application Field Plans

The 74ABT241N,602 finds applications in various digital electronic systems, including but not limited to: - Microprocessor-based systems - Data communication systems - Memory interfaces - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

There are several alternative models available that offer similar functionality to the 74ABT241N,602. Some notable alternatives include: - 74HC241: A CMOS logic device with similar characteristics and pin configuration. - SN74LS241: A TTL logic device providing comparable features and performance. - CD74ACT241: An advanced CMOS logic device with 3-state outputs.

These alternative models can be considered based on specific system requirements and compatibility.

In conclusion, the 74ABT241N,602 is a versatile integrated circuit belonging to the ABT series.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 74ABT241N,602 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of 74ABT241N,602 in technical solutions:

  1. Q: What is the function of the 74ABT241N,602? A: The 74ABT241N,602 is an octal buffer/line driver with 3-state outputs.

  2. Q: What is the maximum operating voltage for the 74ABT241N,602? A: The maximum operating voltage is 5.5V.

  3. Q: How many inputs does the 74ABT241N,602 have? A: The 74ABT241N,602 has eight inputs.

  4. Q: Can the 74ABT241N,602 be used as a level shifter? A: Yes, the 74ABT241N,602 can be used as a level shifter between different voltage domains.

  5. Q: What is the output current capability of the 74ABT241N,602? A: The 74ABT241N,602 has a typical output current capability of ±24mA.

  6. Q: Is the 74ABT241N,602 compatible with TTL logic levels? A: Yes, the 74ABT241N,602 is compatible with both TTL and CMOS logic levels.

  7. Q: Can the 74ABT241N,602 be used in high-speed applications? A: Yes, the 74ABT241N,602 is designed for high-speed operation and has a propagation delay of typically 3.8ns.

  8. Q: Does the 74ABT241N,602 have built-in protection against electrostatic discharge (ESD)? A: Yes, the 74ABT241N,602 has built-in ESD protection on all inputs and outputs.

  9. Q: Can the 74ABT241N,602 be used in bidirectional data transfer applications? A: No, the 74ABT241N,602 is a unidirectional buffer and cannot be used for bidirectional data transfer.

  10. Q: What is the power supply voltage range for the 74ABT241N,602? A: The power supply voltage range for the 74ABT241N,602 is typically between 4.5V and 5.5V.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications of the 74ABT241N,602.