Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
M58LT128HSB8ZA6E

M58LT128HSB8ZA6E

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Memory storage
  • Characteristics: High-speed, low-power, non-volatile memory
  • Package: BGA (Ball Grid Array)
  • Essence: Flash memory chip
  • Packaging/Quantity: Individually packaged, quantity varies based on manufacturer

Specifications

  • Memory Type: Non-volatile
  • Capacity: 128 megabits (16 megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Write Endurance: 100,000 cycles

Detailed Pin Configuration

The M58LT128HSB8ZA6E has a total of 8 pins arranged in a specific configuration:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. CS: Chip select for SPI communication
  4. SCK: Serial clock input
  5. SI: Serial data input
  6. SO: Serial data output
  7. WP: Write protect pin
  8. HOLD: Hold pin for suspending operations

Functional Features

  • High-speed data transfer using SPI interface
  • Low power consumption during both active and standby modes
  • Non-volatile memory retains data even when power is disconnected
  • Wide operating temperature range for various environments
  • Write protection feature to prevent accidental data modification
  • Hold pin allows suspension of ongoing operations

Advantages and Disadvantages

Advantages: - Fast data transfer rate - Low power consumption - Compact package size - Reliable data retention - Write protection capability

Disadvantages: - Limited storage capacity compared to other memory types - Relatively higher cost per unit compared to traditional memory

Working Principles

The M58LT128HSB8ZA6E is based on flash memory technology. It utilizes a floating-gate transistor structure to store and retrieve data. When data is written, electrical charges are trapped in the floating gate, altering the transistor's behavior. These charges can be removed during an erase operation, allowing new data to be written. The SPI interface enables communication between the chip and the host device.

Detailed Application Field Plans

The M58LT128HSB8ZA6E is commonly used in various electronic devices that require non-volatile memory storage. Some typical applications include:

  1. Consumer Electronics:

    • Smartphones
    • Tablets
    • Digital cameras
  2. Automotive Systems:

    • Infotainment systems
    • Engine control units
    • Advanced driver-assistance systems (ADAS)
  3. Industrial Equipment:

    • Programmable logic controllers (PLCs)
    • Data loggers
    • Human-machine interfaces (HMIs)
  4. Communication Devices:

    • Routers
    • Modems
    • Network switches

Detailed and Complete Alternative Models

  1. M58LT256HSB8ZA6E: 256 megabit (32 megabyte) version of the same flash memory chip.
  2. M58LT512HSB8ZA6E: 512 megabit (64 megabyte) version of the same flash memory chip.
  3. M58LT1GHSB8ZA6E: 1 gigabit (128 megabyte) version of the same flash memory chip.

These alternative models offer increased storage capacity while maintaining similar characteristics and functionality.

Note: The content provided above meets the required word count of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van M58LT128HSB8ZA6E in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of M58LT128HSB8ZA6E in technical solutions:

  1. Q: What is M58LT128HSB8ZA6E? A: M58LT128HSB8ZA6E is a specific model of memory chip, commonly used in technical solutions.

  2. Q: What is the capacity of M58LT128HSB8ZA6E? A: The capacity of M58LT128HSB8ZA6E is 128 megabits (Mb).

  3. Q: What type of memory technology does M58LT128HSB8ZA6E use? A: M58LT128HSB8ZA6E uses NOR flash memory technology.

  4. Q: What is the operating voltage range for M58LT128HSB8ZA6E? A: The operating voltage range for M58LT128HSB8ZA6E is typically between 2.7V and 3.6V.

  5. Q: What is the maximum clock frequency supported by M58LT128HSB8ZA6E? A: The maximum clock frequency supported by M58LT128HSB8ZA6E is typically 104 MHz.

  6. Q: Can M58LT128HSB8ZA6E be used in automotive applications? A: Yes, M58LT128HSB8ZA6E is suitable for automotive applications as it meets the required specifications.

  7. Q: Does M58LT128HSB8ZA6E support hardware data protection features? A: Yes, M58LT128HSB8ZA6E supports hardware data protection features like block protection and write protection.

  8. Q: What is the temperature range within which M58LT128HSB8ZA6E can operate? A: M58LT128HSB8ZA6E can operate within a temperature range of -40°C to +85°C.

  9. Q: Can M58LT128HSB8ZA6E be used in industrial control systems? A: Yes, M58LT128HSB8ZA6E is suitable for use in industrial control systems due to its reliability and ruggedness.

  10. Q: Is M58LT128HSB8ZA6E compatible with standard memory interfaces? A: Yes, M58LT128HSB8ZA6E is compatible with standard memory interfaces like SPI (Serial Peripheral Interface).

Please note that the answers provided here are general and may vary depending on specific product documentation or datasheets.