SY100EL38ZI-TR

Overview

Category

SY100EL38ZI-TR belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for various applications.

Characteristics

• High-speed operation
• Low power consumption
• Wide operating voltage range

Package

SY100EL38ZI-TR is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of SY100EL38ZI-TR lies in its ability to provide high-speed and low-power operation in electronic circuits.

Packaging/Quantity

SY100EL38ZI-TR is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications and Parameters

• Operating Voltage Range: 2.375V to 5.5V
• Input Voltage Range: -2.0V to VCC + 2.0V
• Output Voltage Range: GND to VCC
• Maximum Input Clock Frequency: 3GHz
• Propagation Delay: 350ps (typical)

Pin Configuration

SY100EL38ZI-TR has a total of 8 pins, which are labeled as follows:

1. CLK
2. Q0
3. Q1
4. Q2
5. Q3
6. VCC
7. GND
8. /Q0

Functional Characteristics

SY100EL38ZI-TR is a 4-bit synchronous binary counter. It operates on a clock input (CLK) and produces four outputs (Q0-Q3) that represent the count value. The counter advances on each rising edge of the clock signal.

Advantages and Disadvantages

Advantages

• High-speed operation allows for efficient counting in electronic circuits.
• Low power consumption helps in reducing overall power requirements.
• Wide operating voltage range provides flexibility in different applications.

Disadvantages

• Limited count range (4 bits) may not be suitable for certain applications requiring larger counts.
• Synchronous operation may introduce timing constraints in complex circuit designs.

Applicable Range of Products

SY100EL38ZI-TR is commonly used in various electronic systems, including: - Digital communication systems - Data processing equipment - Industrial control systems - Test and measurement instruments

Working Principles

SY100EL38ZI-TR operates based on the principle of synchronous counting. The counter advances its count value on each rising edge of the clock signal. The outputs represent the binary representation of the count value.

Detailed Application Field Plans

SY100EL38ZI-TR can be applied in the following fields:

1. Digital Communication Systems: Used for frequency division and synchronization purposes.
2. Data Processing Equipment: Employed in data manipulation and control circuits.
3. Industrial Control Systems: Utilized for precise timing and sequencing operations.
4. Test and Measurement Instruments: Integrated into high-speed data acquisition and analysis systems.

Detailed Alternative Models

Some alternative models to SY100EL38ZI-TR include: - SY100EL38ZC-TR - SY100EL38ZG-TR - SY100EL38ZL-TR

These models offer similar functionality but may have slight variations in specifications or package options.

5 Common Technical Questions and Answers

1. Q: What is the maximum operating voltage for SY100EL38ZI-TR? A: The maximum operating voltage is 5.5V.

2. Q: Can SY100EL38ZI-TR be used in low-power applications? A: Yes, SY100EL38ZI-TR has low power consumption, making it suitable for such applications.

3. Q: What is the typical propagation delay of SY100EL38ZI-TR? A: The typical propagation delay is 350ps.

4. Q: Can SY100EL38ZI-TR be used as a frequency divider? A: Yes, it can be used for frequency division purposes.

5. Q: What is the count range of SY100EL38ZI-TR? A: SY100EL38ZI-TR is a 4-bit counter, so it can count from 0 to 15.

In conclusion, SY100EL38ZI-TR is a high-speed, low-power 4-bit synchronous binary counter commonly used in various electronic systems. Its wide operating voltage range and small package make it versatile for different applications. However, its limited count range and synchronous operation should be considered when designing complex circuits.