MIC2013-0.8YML-TR

Product Overview

Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: Low Dropout, Fixed Output Voltage
Package: SOT-23-5
Essence: Monolithic IC
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.5V to 6.5V
Output Voltage: 0.8V
Dropout Voltage: 200mV at 100mA
Output Current: 150mA
Line Regulation: ±0.05%
Load Regulation: ±0.1%
Quiescent Current: 50μA
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MIC2013-0.8YML-TR is a 5-pin device with the following pin configuration:

GND (Ground)
VIN (Input Voltage)
VOUT (Output Voltage)
BYP (Bypass Capacitor)
EN (Enable)

Functional Features

Low dropout voltage ensures efficient regulation even with low input voltages.
Fixed output voltage of 0.8V provides a stable power supply for various applications.
Excellent line and load regulation characteristics ensure consistent performance.
Ultra-low quiescent current minimizes power consumption in standby mode.
Enable pin allows for easy on/off control of the regulator.

Advantages and Disadvantages

Advantages: - Low dropout voltage enables operation with low input voltages. - Stable fixed output voltage ensures reliable power supply. - Excellent line and load regulation characteristics provide consistent performance. - Ultra-low quiescent current reduces power consumption in standby mode. - Enable pin allows for convenient on/off control.

Disadvantages: - Limited output current of 150mA may not be sufficient for high-power applications. - Restricted input voltage range of 2.5V to 6.5V may limit compatibility with certain systems.

Working Principles

The MIC2013-0.8YML-TR is a monolithic voltage regulator that utilizes a low dropout (LDO) architecture. It regulates the input voltage to a fixed output voltage of 0.8V, ensuring a stable power supply for various electronic devices. The device achieves this by employing an internal pass transistor and feedback circuitry to maintain the desired output voltage despite variations in the input voltage and load conditions. The enable pin allows for easy control of the regulator's operation, enabling efficient power management.

Detailed Application Field Plans

The MIC2013-0.8YML-TR finds applications in a wide range of electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable devices - Embedded systems - Communication equipment

Detailed and Complete Alternative Models

MIC2013-0.8YML-TR: The model described in this entry.
MIC2013-1.2YML-TR: Similar to the MIC2013-0.8YML-TR, but with a fixed output voltage of 1.2V.
MIC2013-1.8YML-TR: Similar to the MIC2013-0.8YML-TR, but with a fixed output voltage of 1.8V.
MIC2013-2.5YML-TR: Similar to the MIC2013-0.8YML-TR, but with a fixed output voltage of 2.5V.

These alternative models provide different fixed output voltages to accommodate various voltage requirements in different applications.

Word count: 311 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MIC2013-0.8YML-TR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MIC2013-0.8YML-TR in technical solutions:

Q: What is MIC2013-0.8YML-TR? A: MIC2013-0.8YML-TR is a specific model or component used in technical solutions, often referred to as a microcontroller.
Q: What are the key features of MIC2013-0.8YML-TR? A: Some key features of MIC2013-0.8YML-TR include low power consumption, high performance, small form factor, and various input/output options.
Q: How can I interface with MIC2013-0.8YML-TR? A: MIC2013-0.8YML-TR can be interfaced using standard communication protocols such as UART, SPI, or I2C, depending on the specific requirements of your application.
Q: What programming language is used for MIC2013-0.8YML-TR? A: MIC2013-0.8YML-TR can be programmed using various languages like C, C++, or assembly language, depending on the development environment and tools available.
Q: Can MIC2013-0.8YML-TR be used in battery-powered devices? A: Yes, MIC2013-0.8YML-TR is designed to operate efficiently in low-power scenarios, making it suitable for battery-powered devices.
Q: Are there any development boards available for MIC2013-0.8YML-TR? A: Yes, there are development boards specifically designed for MIC2013-0.8YML-TR, which provide an easy way to prototype and test your technical solutions.
Q: Can MIC2013-0.8YML-TR be used in industrial applications? A: Yes, MIC2013-0.8YML-TR is often used in industrial applications due to its reliability, robustness, and ability to handle various input/output requirements.
Q: What are the typical operating conditions for MIC2013-0.8YML-TR? A: The typical operating voltage range for MIC2013-0.8YML-TR is between 2.7V and 5.5V, with a recommended operating temperature range of -40°C to +85°C.
Q: Is there any documentation available for MIC2013-0.8YML-TR? A: Yes, the manufacturer provides datasheets, application notes, and user manuals that provide detailed information on using MIC2013-0.8YML-TR in technical solutions.
Q: Where can I purchase MIC2013-0.8YML-TR? A: MIC2013-0.8YML-TR can be purchased from authorized distributors or directly from the manufacturer's website.