Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MCP6004-E/P
Details bekijken DataSheets

MCP6004-E/P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low Power, Rail-to-Rail Output, Quad Op Amp
  • Package: PDIP-14 (Plastic Dual In-Line Package)
  • Essence: The MCP6004-E/P is a low-power quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: The MCP6004-E/P is available in a tube packaging with a quantity of 25 units.

Specifications

  • Supply Voltage: 1.8V to 6.0V
  • Input Offset Voltage: ±6mV (maximum)
  • Input Bias Current: ±20nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Slew Rate: 0.6V/µs (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MCP6004-E/P has a total of 14 pins arranged as follows:

___________ | | 1 | Vout 1 | 14 2 | V- 1 | 13 3 | V+ 1 | 12 4 | NC | 11 5 | V+ 2 | 10 6 | V- 2 | 9 7 | Vout 2 | 8 |___________|

Functional Features

  • Low power consumption: The MCP6004-E/P operates at a low supply voltage and consumes minimal power, making it suitable for battery-powered applications.
  • Rail-to-rail output: The operational amplifier provides an output voltage range that extends to the supply rails, allowing for maximum utilization of the available dynamic range.
  • Quad op amp: The MCP6004-E/P consists of four independent operational amplifiers in a single package, providing flexibility and cost-effectiveness.

Advantages and Disadvantages

Advantages: - Low power consumption enables longer battery life in portable devices. - Rail-to-rail output allows for accurate signal amplification even at low supply voltages. - Quad op amp configuration saves board space and reduces component count.

Disadvantages: - Limited gain bandwidth product may not be suitable for high-frequency applications. - Input offset voltage and bias current may introduce errors in precision applications.

Working Principles

The MCP6004-E/P operates as a voltage amplifier, taking an input voltage and amplifying it to a higher level. It utilizes internal circuitry to provide amplification with low power consumption and rail-to-rail output capability. The quad op amp configuration allows for multiple independent amplification channels within a single IC.

Detailed Application Field Plans

The MCP6004-E/P is commonly used in various applications, including but not limited to: 1. Sensor signal conditioning 2. Audio amplification 3. Battery-powered instrumentation 4. Portable medical devices 5. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the MCP6004-E/P include: - LM324 - TL074 - AD822

These alternatives offer similar functionality and can be considered based on specific application requirements.

In conclusion, the MCP6004-E/P is a low-power quad operational amplifier that provides flexibility, low power consumption, and rail-to-rail output capability. It finds applications in various fields such as sensor signal conditioning, audio amplification, and battery-powered instrumentation.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MCP6004-E/P in technische oplossingen

  1. What is the maximum supply voltage for MCP6004-E/P?
    - The maximum supply voltage for MCP6004-E/P is 6.0V.

  2. Can MCP6004-E/P be used in single-supply applications?
    - Yes, MCP6004-E/P can be used in single-supply applications.

  3. What is the typical input offset voltage for MCP6004-E/P?
    - The typical input offset voltage for MCP6004-E/P is 3 mV.

  4. Is MCP6004-E/P suitable for low-power applications?
    - Yes, MCP6004-E/P is suitable for low-power applications with its low quiescent current of 100 µA.

  5. What is the operating temperature range for MCP6004-E/P?
    - The operating temperature range for MCP6004-E/P is -40°C to 125°C.

  6. Can MCP6004-E/P be used as a comparator?
    - Yes, MCP6004-E/P can be used as a comparator due to its rail-to-rail input and output capabilities.

  7. What is the typical gain bandwidth product for MCP6004-E/P?
    - The typical gain bandwidth product for MCP6004-E/P is 1 MHz.

  8. Does MCP6004-E/P have ESD protection?
    - Yes, MCP6004-E/P has ESD protection up to 4 kV.

  9. Can MCP6004-E/P be used in battery-powered applications?
    - Yes, MCP6004-E/P can be used in battery-powered applications due to its low power consumption.

  10. Is MCP6004-E/P available in a DIP package?
    - Yes, MCP6004-E/P is available in a DIP package for easy prototyping and breadboarding.