Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MCP4911-E/MS

MCP4911-E/MS

Product Overview

Category

The MCP4911-E/MS belongs to the category of digital-to-analog converters (DACs).

Use

This product is primarily used in applications where a digital signal needs to be converted into an analog voltage or current. It finds extensive use in various industries, including telecommunications, audio equipment, industrial automation, and instrumentation.

Characteristics

  • High resolution: The MCP4911-E/MS offers 12-bit resolution, allowing for precise analog output.
  • Low power consumption: This DAC operates at low power, making it suitable for battery-powered devices.
  • Fast settling time: With a fast settling time of 4.5 µs, it enables rapid response in dynamic applications.
  • SPI interface: The MCP4911-E/MS utilizes a Serial Peripheral Interface (SPI) for easy integration with microcontrollers and other digital systems.

Package and Quantity

The MCP4911-E/MS is available in a small MSOP-8 package, which ensures space-efficient PCB design. It is typically sold in reels containing 250 units.

Specifications

  • Resolution: 12 bits
  • Output type: Voltage or current
  • Output range: 0V to Vref (voltage mode), 0mA to Iref (current mode)
  • Supply voltage: 2.7V to 5.5V
  • Operating temperature range: -40°C to +125°C
  • SPI clock frequency: Up to 20 MHz

Pin Configuration

The MCP4911-E/MS features an 8-pin MSOP package with the following pinout:

┌───┬───┐ │ 1 │ 8 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ 4 │ 5 │ └───┴───┘

  1. VDD - Supply voltage
  2. CS - Chip select (active low)
  3. SCK - Serial clock input
  4. SDI - Serial data input
  5. LDAC - Load DAC register (active low)
  6. VOUT - Analog output voltage or current
  7. AGND - Analog ground
  8. DGND - Digital ground

Functional Features

  • High accuracy: The MCP4911-E/MS provides excellent linearity and low integral non-linearity (INL), ensuring accurate analog output.
  • Buffered output: The output is buffered, allowing it to drive external loads without significant degradation in performance.
  • Power-down mode: It offers a power-saving feature that allows the device to enter a low-power state when not in use.
  • Daisy-chain capability: Multiple MCP4911-E/MS devices can be daisy-chained using the SPI interface, simplifying system design.

Advantages and Disadvantages

Advantages

  • High resolution and accuracy
  • Low power consumption
  • Fast settling time
  • Small package size for space-constrained applications
  • Easy integration with microcontrollers through SPI interface

Disadvantages

  • Limited output range compared to higher-resolution DACs
  • Lack of built-in reference voltage source may require an external reference circuitry

Working Principles

The MCP4911-E/MS operates by accepting digital input data through the SPI interface. This data is then converted into an analog voltage or current output based on the specified resolution. The device utilizes an internal reference voltage or current to generate the analog output signal. The buffered output ensures that the signal can drive external loads effectively.

Detailed Application Field Plans

The MCP4911-E/MS finds application in various fields, including:

  1. Audio equipment: It can be used in audio synthesizers, digital mixers, and sound processors to convert digital audio signals into analog voltages for amplification and playback.
  2. Industrial automation: The DAC is suitable for controlling analog actuators, such as valves and motors, in industrial automation systems.
  3. Instrumentation: It can be employed in test and measurement instruments to generate precise analog signals for calibration and testing purposes.
  4. Telecommunications: The MCP4911-E/MS can be utilized in communication systems for generating analog control signals or modulation signals.

Detailed and Complete Alternative Models

  • MCP4921-E/MS: Similar to the MCP4911-E/MS but offers 10-bit resolution instead of 12 bits.
  • MCP4922-E/MS: Dual-channel version of the MCP4911-E/MS, providing two independent DACs in a single package.
  • MCP4901-E/MS: Lower-cost alternative with 8-bit resolution, suitable for applications where lower accuracy is acceptable.

These alternative models offer different resolutions and features to cater to specific application requirements.

In conclusion, the MCP4911-E/MS is

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MCP4911-E/MS in technische oplossingen

  1. What is the maximum output voltage of MCP4911-E/MS?
    - The maximum output voltage of MCP4911-E/MS is VDD.

  2. Can MCP4911-E/MS operate at different reference voltages?
    - Yes, MCP4911-E/MS can operate at various reference voltages within its specified range.

  3. What is the resolution of MCP4911-E/MS?
    - The resolution of MCP4911-E/MS is 10 bits.

  4. Is MCP4911-E/MS suitable for low-power applications?
    - Yes, MCP4911-E/MS is designed for low-power applications.

  5. How many channels does MCP4911-E/MS have?
    - MCP4911-E/MS has a single channel.

  6. Can MCP4911-E/MS be used in industrial control systems?
    - Yes, MCP4911-E/MS is suitable for use in industrial control systems.

  7. What is the SPI interface speed supported by MCP4911-E/MS?
    - MCP4911-E/MS supports SPI interface speeds up to 20 MHz.

  8. Does MCP4911-E/MS have built-in EEPROM memory?
    - No, MCP4911-E/MS does not have built-in EEPROM memory.

  9. Can MCP4911-E/MS be powered from a single supply voltage?
    - Yes, MCP4911-E/MS can be powered from a single supply voltage.

  10. What is the temperature range for MCP4911-E/MS operation?
    - MCP4911-E/MS can operate within a temperature range of -40°C to 125°C.