Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
5KP200CA-TP

5KP200CA-TP Product Overview

Introduction

The 5KP200CA-TP belongs to the category of transient voltage suppressor diodes. These diodes are widely used in electronic circuits to protect sensitive components from voltage spikes and transients. This entry provides a comprehensive overview of the 5KP200CA-TP, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protecting electronic circuits from voltage spikes and transients
  • Characteristics: High surge capability, fast response time, low clamping voltage
  • Package: Through Hole
  • Essence: Provides protection against transient overvoltage conditions
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Part Number: 5KP200CA-TP
  • Voltage - Reverse Standoff (Typ): 171V
  • Voltage - Breakdown: 189V
  • Clamping Voltage @ Ipp: 275V
  • Current - Peak Pulse (10/1000µs): 3.2A
  • Power - Peak Pulse: 5000W
  • Type: Zener

Detailed Pin Configuration

The 5KP200CA-TP typically has two pins, with the anode and cathode connections for installation in electronic circuits.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to a safe level
  • Fast Response Time: Rapid reaction to voltage spikes
  • High Surge Capability: Capable of withstanding high surge currents

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time ensures minimal damage to sensitive components
  • High surge capability for reliable performance in demanding environments

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection
  • Clamping voltage may still allow some voltage to reach protected components

Working Principles

The 5KP200CA-TP operates by diverting excess voltage away from sensitive components when a transient voltage spike occurs. It achieves this through rapid conduction and clamping of the voltage to a safe level, thereby protecting downstream electronics.

Detailed Application Field Plans

The 5KP200CA-TP is commonly used in various applications, including: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • Alternative Model 1: 5KP220CA-TP
  • Alternative Model 2: 5KP240CA-TP
  • Alternative Model 3: 5KP260CA-TP
  • Alternative Model 4: 5KP280CA-TP

These alternative models offer similar transient voltage suppression capabilities with varying breakdown voltages to suit specific application requirements.

In conclusion, the 5KP200CA-TP transient voltage suppressor diode is a crucial component in protecting electronic circuits from voltage spikes and transients. Its fast response time, high surge capability, and effective transient voltage suppression make it a valuable asset in various electronic applications.

[Word Count: 443]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 5KP200CA-TP in technische oplossingen

Sure, here are 10 common questions and answers related to the application of 5KP200CA-TP in technical solutions:

  1. What is the maximum peak pulse power dissipation of 5KP200CA-TP?

    • The maximum peak pulse power dissipation of 5KP200CA-TP is 5000 watts for a 10/1000μs waveform.
  2. What is the breakdown voltage of 5KP200CA-TP?

    • The breakdown voltage of 5KP200CA-TP is 200 volts.
  3. What are the typical applications of 5KP200CA-TP?

    • 5KP200CA-TP is commonly used in surge protection for sensitive electronics, such as in telecommunications equipment, industrial control systems, and power supplies.
  4. What is the clamping voltage of 5KP200CA-TP?

    • The clamping voltage of 5KP200CA-TP is 324 volts at 16.7A.
  5. What is the operating temperature range of 5KP200CA-TP?

    • The operating temperature range of 5KP200CA-TP is -55°C to +175°C.
  6. Does 5KP200CA-TP meet industry standards for surge protection?

    • Yes, 5KP200CA-TP meets the requirements of various industry standards, including IEC 61000-4-5 for surge immunity testing.
  7. Can 5KP200CA-TP be used for lightning protection?

    • Yes, 5KP200CA-TP can be used for lightning protection in conjunction with other protective measures.
  8. What is the response time of 5KP200CA-TP?

    • The response time of 5KP200CA-TP is less than 1.0 nanosecond.
  9. Is 5KP200CA-TP suitable for high-speed data lines?

    • Yes, 5KP200CA-TP is suitable for protecting high-speed data lines from transient overvoltage events.
  10. What packaging options are available for 5KP200CA-TP?

    • 5KP200CA-TP is available in a variety of packages, including DO-201, DO-15, and R-6.

I hope these questions and answers are helpful for your technical solutions! If you have any more specific questions, feel free to ask.