Maxim Integrated
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MAX9268GCM/V+TG2C
Details bekijken DataSheets

MAX9268GCM/V+TG2C

Introduction

The MAX9268GCM/V+TG2C is a high-speed, low-power quad deserializer for coax or STP cables. It is designed for use in automotive infotainment systems, advanced driver assistance systems (ADAS), and surround-view systems.

Basic Information Overview

  • Category: Integrated Circuit/Communication Interface
  • Use: Automotive Infotainment Systems, ADAS, Surround-View Systems
  • Characteristics: High-speed, Low-power, Quad Deserializer
  • Package: 48-Pin TQFN
  • Essence: High-speed data transmission and reception
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Data Rate: Up to 3.12Gbps
  • Operating Voltage: 1.71V to 2.625V
  • Operating Temperature: -40°C to +105°C
  • Power Consumption: 100mW per Channel
  • ESD Protection: ±8kV HBM on RX Inputs and LVDS Outputs

Detailed Pin Configuration

The MAX9268GCM/V+TG2C features a detailed pin configuration with specific functions assigned to each pin. Please refer to the datasheet for the complete pinout diagram.

Functional Features

  • Quad Deserializer: Capable of receiving data from up to four serializers
  • Coax or STP Cable Support: Flexible input options for different system configurations
  • Low Power Consumption: Suitable for automotive applications with power constraints
  • High-Speed Data Transmission: Supports high data rates for real-time video and sensor data

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Low power consumption
  • ESD protection for robustness in automotive environments

Disadvantages

  • Limited to automotive applications
  • Requires careful PCB layout for optimal performance

Working Principles

The MAX9268GCM/V+TG2C operates by receiving serialized data from up to four cameras or sensors through coax or STP cables. It then deserializes this data and outputs it in parallel format for further processing by the host system.

Detailed Application Field Plans

The MAX9268GCM/V+TG2C is specifically designed for use in automotive applications such as infotainment systems, ADAS, and surround-view systems. Its high-speed, low-power characteristics make it suitable for transmitting real-time video and sensor data within the vehicle environment.

Detailed and Complete Alternative Models

  • MAX9278: Quad Serializer with similar specifications
  • DS90UB913A-Q1: Automotive FPD-Link III Deserializer
  • LT8918H: Quad-Channel MIPI DSI/CSI-2 Deserializer

In conclusion, the MAX9268GCM/V+TG2C is a specialized integrated circuit designed for high-speed data transmission in automotive applications. Its unique combination of features makes it an essential component in modern automotive electronics systems.

Word Count: 411

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MAX9268GCM/V+TG2C in technische oplossingen

  1. What is the maximum data rate supported by MAX9268GCM/V+TG2C?

    • The MAX9268GCM/V+TG2C supports a maximum data rate of 3.12Gbps.

  2. What is the operating voltage range for MAX9268GCM/V+TG2C?

    • The operating voltage range for MAX9268GCM/V+TG2C is 3V to 3.6V.

  3. Does MAX9268GCM/V+TG2C support spread spectrum clocking?

    • Yes, MAX9268GCM/V+TG2C supports spread spectrum clocking for reduced EMI.

  4. What is the typical power consumption of MAX9268GCM/V+TG2C?

    • The typical power consumption of MAX9268GCM/V+TG2C is 120mW.

  5. Is MAX9268GCM/V+TG2C compatible with automotive applications?

    • Yes, MAX9268GCM/V+TG2C is designed for automotive applications and is AEC-Q100 qualified.

  6. What is the maximum cable length supported by MAX9268GCM/V+TG2C?

    • MAX9268GCM/V+TG2C supports cable lengths of up to 15 meters using coaxial or STP cables.

  7. Does MAX9268GCM/V+TG2C have built-in diagnostic features?

    • Yes, MAX9268GCM/V+TG2C includes built-in diagnostic features for monitoring link status and cable integrity.

  8. What is the temperature range for operation of MAX9268GCM/V+TG2C?

    • MAX9268GCM/V+TG2C has an extended temperature range of -40°C to +105°C.

  9. Can MAX9268GCM/V+TG2C be used in multi-camera systems?

    • Yes, MAX9268GCM/V+TG2C is suitable for use in multi-camera systems and supports daisy-chaining.

  10. Does MAX9268GCM/V+TG2C support HDCP content protection?

    • No, MAX9268GCM/V+TG2C does not support HDCP content protection as it is primarily designed for automotive video applications.