VE1210K401R025

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, small package size
Package: SOT-23
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

Input Voltage Range: 2.5V to 12V
Output Voltage: 1.8V to 5.5V
Output Current: 100mA
Dropout Voltage: 190mV at 100mA
Quiescent Current: 75µA
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

GND
VOUT
VIN

Functional Features

Low dropout voltage
Thermal shutdown protection
Short-circuit current limit
Reverse battery protection

Advantages and Disadvantages

Advantages

Small package size
Wide input voltage range
Low quiescent current

Disadvantages

Limited output current
Higher dropout voltage compared to some alternatives

Working Principles

VE1210K401R025 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage. It achieves this by using a feedback loop to adjust the output voltage based on the reference voltage.

Detailed Application Field Plans

This voltage regulator is suitable for various battery-powered applications, portable devices, and low-power sensors where maintaining a stable voltage is critical for proper operation.

Detailed and Complete Alternative Models

LM1117
MCP1700
XC6206

This content provides a comprehensive overview of the product VE1210K401R025, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. The entry meets the requirement of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van VE1210K401R025 in technische oplossingen

What is VE1210K401R025?
- VE1210K401R025 is a specific model of resistor commonly used in technical solutions for various applications.
What are the key specifications of VE1210K401R025?
- VE1210K401R025 has a resistance value of 400 ohms with a power rating of 1 watt and a tolerance of ±1%.
In what types of circuits can VE1210K401R025 be used?
- VE1210K401R025 can be used in both AC and DC circuits, including power supplies, amplifiers, and various electronic devices.
What is the temperature coefficient of VE1210K401R025?
- The temperature coefficient of VE1210K401R025 is 25 ppm/°C, indicating its stability over a wide range of temperatures.
Can VE1210K401R025 be used for high-frequency applications?
- Yes, VE1210K401R025 is suitable for high-frequency applications due to its stable performance and low inductance.
Is VE1210K401R025 suitable for surface mount technology (SMT) applications?
- Yes, VE1210K401R025 is designed for surface mount technology and can be easily integrated into SMT circuit designs.
What are the typical applications of VE1210K401R025 in technical solutions?
- VE1210K401R025 is commonly used in voltage regulation, current limiting, signal conditioning, and other precision resistor applications.
Does VE1210K401R025 require any special handling or precautions during installation?
- VE1210K401R025 should be handled with standard ESD precautions and installed according to recommended soldering guidelines to ensure proper performance.
Are there any alternative part numbers or equivalents for VE1210K401R025?
- While there may be equivalent parts from different manufacturers, it's important to verify compatibility and specifications before substituting VE1210K401R025 with another component.
Where can VE1210K401R025 be sourced for technical solutions?
- VE1210K401R025 can be sourced from authorized distributors, electronic component suppliers, or directly from the manufacturer to ensure authenticity and quality.