IXYS
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
IXDN514D1T/R
Details bekijken DataSheets

IXDN514D1T/R

Product Overview

Category

The IXDN514D1T/R belongs to the category of high-speed, high-current MOSFET drivers.

Use

It is used to drive MOSFETs in various applications such as motor control, power supplies, and inverters.

Characteristics

  • High-speed switching capability
  • High current drive capacity
  • Low input-output propagation delay
  • Wide operating voltage range
  • Thermal shutdown protection

Package

The IXDN514D1T/R comes in a small outline package (SOP) with 8 pins.

Essence

The essence of this product lies in its ability to efficiently drive MOSFETs at high speeds and currents while providing protection features.

Packaging/Quantity

The product is typically packaged in reels and available in quantities suitable for production runs.

Specifications

  • Operating Voltage Range: 4.5V to 35V
  • Output Current: 2A peak
  • Propagation Delay: 25ns typical
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOP-8

Detailed Pin Configuration

  1. IN - Input
  2. GND - Ground
  3. VCC - Power Supply
  4. LO - Low-Side Output
  5. COM - Common
  6. HO - High-Side Output
  7. SD - Shutdown
  8. VS - Bootstrap Supply

Functional Features

  • High-speed switching
  • High-current drive capability
  • Thermal shutdown protection
  • Bootstrap supply for high-side gate drive

Advantages and Disadvantages

Advantages

  • Efficiently drives MOSFETs at high speeds and currents
  • Provides thermal shutdown protection
  • Suitable for a wide range of operating voltages

Disadvantages

  • Requires external bootstrap components for high-side drive
  • May require careful PCB layout for optimal performance

Working Principles

The IXDN514D1T/R operates by receiving input signals and driving the MOSFET gates to switch them on and off at high speeds. It utilizes a bootstrap supply for high-side gate drive and incorporates thermal shutdown protection to prevent overheating.

Detailed Application Field Plans

This driver is well-suited for use in applications such as: - Brushless DC motor control - Switch-mode power supplies - Inverters for renewable energy systems

Detailed and Complete Alternative Models

Some alternative models to consider include: - IXDN404PI - IXDN609PI - IR2104 - IRS21844

In conclusion, the IXDN514D1T/R is a versatile high-speed, high-current MOSFET driver that offers efficient switching and protection features, making it suitable for a wide range of applications.

[Word Count: 410]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van IXDN514D1T/R in technische oplossingen

  1. What is the maximum output current of IXDN514D1T/R?
    - The maximum output current of IXDN514D1T/R is 4A.

  2. What is the input voltage range for IXDN514D1T/R?
    - The input voltage range for IXDN514D1T/R is 4.5V to 35V.

  3. Can IXDN514D1T/R be used in automotive applications?
    - Yes, IXDN514D1T/R is suitable for automotive applications.

  4. What is the typical propagation delay of IXDN514D1T/R?
    - The typical propagation delay of IXDN514D1T/R is 25ns.

  5. Is IXDN514D1T/R compatible with TTL and CMOS logic levels?
    - Yes, IXDN514D1T/R is compatible with TTL and CMOS logic levels.

  6. What is the operating temperature range of IXDN514D1T/R?
    - The operating temperature range of IXDN514D1T/R is -40°C to 125°C.

  7. Can IXDN514D1T/R be used in motor control applications?
    - Yes, IXDN514D1T/R is suitable for motor control applications.

  8. What is the package type of IXDN514D1T/R?
    - IXDN514D1T/R comes in a 8-SOIC package.

  9. Does IXDN514D1T/R have built-in shoot-through protection?
    - Yes, IXDN514D1T/R has built-in shoot-through protection.

  10. What is the recommended supply voltage for IXDN514D1T/R?
    - The recommended supply voltage for IXDN514D1T/R is 12V.