Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
X9317TM8I-2.7
Details bekijken DataSheets

X9317TM8I-2.7

Product Overview

Category

X9317TM8I-2.7 belongs to the category of digital potentiometers.

Use

This product is primarily used for electronic circuitry and system calibration, as well as for controlling analog signals in various applications.

Characteristics

  • Digital control interface
  • Non-volatile memory
  • Low power consumption
  • Wide operating voltage range
  • Small package size
  • High resolution

Package

X9317TM8I-2.7 is available in a compact 8-pin package.

Essence

The essence of X9317TM8I-2.7 lies in its ability to provide precise and reliable digital control over analog signals, offering flexibility and convenience in circuit calibration and signal adjustment.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 2.7V
  • Resistance Range: 10kΩ
  • Number of Taps: 100
  • End-to-End Resistance Tolerance: ±20%
  • Temperature Coefficient: ±300ppm/°C
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Power supply input
  2. H: High terminal of resistor network
  3. U/D: Up/Down control input
  4. CS: Chip select input
  5. INC: Increment control input
  6. W: Wiper terminal of resistor network
  7. GND: Ground reference
  8. A: Low terminal of resistor network

Functional Features

  • Digital control interface allows easy integration into digital systems.
  • Non-volatile memory retains settings even when power is disconnected.
  • Increment control enables precise adjustments.
  • Up/Down control facilitates easy signal adjustment.
  • Wide operating voltage range allows compatibility with various systems.

Advantages and Disadvantages

Advantages

  • Precise and reliable analog signal control
  • Easy integration into digital systems
  • Retains settings without power supply
  • Flexible adjustment options
  • Compact package size

Disadvantages

  • Limited resistance range (10kΩ)
  • End-to-end resistance tolerance of ±20%

Working Principles

X9317TM8I-2.7 operates by digitally controlling the position of the wiper terminal within the resistor network. The digital control interface receives commands from an external system, which are then translated into specific positions for the wiper. This positioning determines the resistance value between the wiper and the low terminal, effectively controlling the analog signal passing through the device.

Detailed Application Field Plans

X9317TM8I-2.7 finds applications in various fields, including: 1. Audio equipment calibration 2. Industrial automation systems 3. Instrumentation and measurement devices 4. Communication systems 5. Automotive electronics 6. Consumer electronics

Detailed and Complete Alternative Models

  1. X9C103S: 10kΩ digital potentiometer with 100 taps
  2. MCP4011-103E/P: 10kΩ single-channel digital potentiometer
  3. AD8400ARZ10: 10kΩ quad-channel digital potentiometer
  4. MAX5481EUD+: 10kΩ dual-channel digital potentiometer
  5. CAT5114YI-00-GT3: 10kΩ I2C-controlled digital potentiometer

These alternative models offer similar functionality and can be considered as alternatives to X9317TM8I-2.7 based on specific requirements and system compatibility.

Word count: 477 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van X9317TM8I-2.7 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of X9317TM8I-2.7 in technical solutions:

  1. Q: What is the X9317TM8I-2.7? A: The X9317TM8I-2.7 is a digitally controlled potentiometer (XDCP) that can be used in various technical applications.

  2. Q: What is the voltage rating of the X9317TM8I-2.7? A: The X9317TM8I-2.7 has a voltage rating of 2.7V.

  3. Q: How does the X9317TM8I-2.7 work? A: The X9317TM8I-2.7 works by digitally controlling the resistance between its terminals using a serial interface.

  4. Q: What is the resolution of the X9317TM8I-2.7? A: The X9317TM8I-2.7 has a resolution of 64 taps, allowing for precise control over the resistance value.

  5. Q: Can the X9317TM8I-2.7 be used in audio applications? A: Yes, the X9317TM8I-2.7 can be used in audio applications for volume control or tone adjustment.

  6. Q: Is the X9317TM8I-2.7 compatible with microcontrollers? A: Yes, the X9317TM8I-2.7 can be easily interfaced with microcontrollers using its serial interface.

  7. Q: Can the X9317TM8I-2.7 be used in power supply circuits? A: Yes, the X9317TM8I-2.7 can be used in power supply circuits for voltage regulation or current limiting.

  8. Q: What is the temperature range of the X9317TM8I-2.7? A: The X9317TM8I-2.7 has an operating temperature range of -40°C to +85°C.

  9. Q: Can multiple X9317TM8I-2.7 devices be cascaded together? A: Yes, multiple X9317TM8I-2.7 devices can be cascaded together to increase the number of available taps.

  10. Q: Are there any application notes or reference designs available for the X9317TM8I-2.7? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing the X9317TM8I-2.7 in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.