Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ISL83386EIVZ-T

ISL83386EIVZ-T

Introduction

The ISL83386EIVZ-T is a high-performance, dual-channel digital isolator belonging to the category of integrated circuits. It is commonly used for signal isolation in various applications and is known for its reliable performance and robust characteristics. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the ISL83386EIVZ-T.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: Signal Isolation
  • Characteristics: High-performance, Dual-channel, Reliable
  • Package: SOIC-16
  • Essence: Digital Isolator
  • Packaging/Quantity: Tape & Reel (2500 units)

Specifications

  • Number of Channels: 2
  • Isolation Voltage: 5 kV
  • Data Rate: Up to 150 Mbps
  • Supply Voltage Range: 3 V to 5.5 V
  • Operating Temperature Range: -40°C to +125°C
  • Propagation Delay: 10 ns (Max)
  • Low Power Consumption: 3.5 mA (Max)

Detailed Pin Configuration

The ISL83386EIVZ-T features a 16-pin Small Outline Integrated Circuit (SOIC) package with a detailed pin configuration as follows: 1. Channel 1 Input 2. Channel 1 Output 3. Channel 1 GND 4. Channel 1 VCC 5. Channel 2 Input 6. Channel 2 Output 7. Channel 2 GND 8. Channel 2 VCC 9. NC 10. NC 11. NC 12. NC 13. NC 14. NC 15. NC 16. NC

Functional Features

  • High-Speed Operation: Supports data rates up to 150 Mbps, enabling rapid signal transmission.
  • Robust Isolation: Provides 5 kV isolation voltage, ensuring reliable signal isolation and protection.
  • Low Power Consumption: Consumes minimal power, making it suitable for energy-efficient applications.
  • Wide Supply Voltage Range: Operates within a broad supply voltage range, enhancing versatility.

Advantages and Disadvantages

Advantages

  • High-speed operation
  • Robust isolation
  • Low power consumption
  • Wide supply voltage range

Disadvantages

  • Limited channel count
  • Relatively higher cost compared to lower-performance isolators

Working Principles

The ISL83386EIVZ-T utilizes advanced digital isolation technology to transmit signals between its input and output channels while providing galvanic isolation. This is achieved through the use of internal capacitive coupling and proprietary isolation techniques, ensuring reliable signal transfer without direct electrical connection.

Detailed Application Field Plans

The ISL83386EIVZ-T finds extensive application in various fields, including but not limited to: - Industrial Automation - Automotive Electronics - Power Systems - Medical Devices - Communication Equipment

Detailed and Complete Alternative Models

For users seeking alternative options, the following digital isolators can be considered: - ADuM1201 - MAX14930 - Si823Hx

In conclusion, the ISL83386EIVZ-T stands as a high-performance digital isolator offering reliable signal isolation, high-speed operation, and robust characteristics. Its versatile application across diverse fields makes it a valuable component in modern electronic systems.

Word Count: 498

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL83386EIVZ-T in technische oplossingen

  1. What is the maximum operating frequency of ISL83386EIVZ-T?

    • The maximum operating frequency of ISL83386EIVZ-T is 100MHz.
  2. What is the input voltage range for ISL83386EIVZ-T?

    • The input voltage range for ISL83386EIVZ-T is from 3V to 5.5V.
  3. What is the typical supply current of ISL83386EIVZ-T?

    • The typical supply current of ISL83386EIVZ-T is 6.5mA.
  4. What is the output drive capability of ISL83386EIVZ-T?

    • ISL83386EIVZ-T has a high output drive capability, making it suitable for driving heavy loads.
  5. Does ISL83386EIVZ-T have built-in protection features?

    • Yes, ISL83386EIVZ-T includes built-in protection features such as thermal shutdown and overcurrent protection.
  6. What is the temperature range for ISL83386EIVZ-T?

    • ISL83386EIVZ-T operates within a temperature range of -40°C to 125°C.
  7. Can ISL83386EIVZ-T be used in automotive applications?

    • Yes, ISL83386EIVZ-T is suitable for automotive applications due to its wide operating temperature range and robust design.
  8. What is the package type of ISL83386EIVZ-T?

    • ISL83386EIVZ-T is available in a small footprint 8-lead MSOP package.
  9. Is ISL83386EIVZ-T RoHS compliant?

    • Yes, ISL83386EIVZ-T is RoHS compliant, making it environmentally friendly.
  10. What are the typical applications for ISL83386EIVZ-T?

    • ISL83386EIVZ-T is commonly used in industrial automation, instrumentation, and communication systems for level translation and buffering.