Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ISL6208CR
Details bekijken DataSheets

ISL6208CR

Product Overview

Category

ISL6208CR belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in electronic devices.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL6208CR is available in a compact surface mount package.

Essence

The essence of ISL6208CR lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

ISL6208CR is typically packaged in reels or tubes, with a quantity of 250 or 1000 units per package.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 3A
  • Dropout Voltage: 200mV at 1A
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

ISL6208CR has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin to control the device's operation
  5. VOUT: Output voltage

Functional Features

  • High efficiency conversion
  • Fast transient response
  • Built-in overcurrent and thermal protection
  • Adjustable output voltage through feedback pin
  • Low dropout voltage for improved efficiency

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility
  • Overcurrent and thermal protection ensure device safety

Disadvantages

  • Limited maximum output current may restrict certain high-power applications
  • Dropout voltage may cause slight power loss

Working Principles

ISL6208CR operates based on a switching regulator topology. It uses a combination of inductors, capacitors, and switches to efficiently regulate the input voltage to the desired output voltage level.

Detailed Application Field Plans

ISL6208CR finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL6208CR are: - LM2576-ADJ - LT1084CP-5 - TPS5430DDAR

These models can be considered as alternatives depending on specific requirements and design constraints.

Word count: 314 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ISL6208CR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ISL6208CR in technical solutions:

  1. Q: What is ISL6208CR? A: ISL6208CR is a high-performance, synchronous buck controller IC used for voltage regulation in various electronic applications.

  2. Q: What is the input voltage range supported by ISL6208CR? A: The input voltage range supported by ISL6208CR is typically between 4.5V and 28V.

  3. Q: What is the output voltage range that can be achieved using ISL6208CR? A: The output voltage range that can be achieved using ISL6208CR depends on the external components used, but it is typically between 0.6V and 5.5V.

  4. Q: What is the maximum output current that ISL6208CR can handle? A: ISL6208CR can handle a maximum output current of up to 8A.

  5. Q: Does ISL6208CR require an external MOSFET for operation? A: Yes, ISL6208CR requires an external N-channel MOSFET for operation.

  6. Q: Can ISL6208CR operate in a synchronous rectification mode? A: Yes, ISL6208CR supports synchronous rectification, which improves efficiency and reduces power losses.

  7. Q: What is the switching frequency range of ISL6208CR? A: The switching frequency range of ISL6208CR is typically between 100kHz and 1MHz.

  8. Q: Does ISL6208CR have built-in protection features? A: Yes, ISL6208CR has built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  9. Q: Can ISL6208CR be used in automotive applications? A: Yes, ISL6208CR is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

  10. Q: What are some typical applications of ISL6208CR? A: Some typical applications of ISL6208CR include power supplies, battery chargers, LED drivers, and various other voltage regulation circuits.

Please note that the answers provided here are general and may vary depending on specific design considerations and application requirements.