Intersil
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
HIP4080AIBZT
Details bekijken DataSheets

HIP4080AIBZT

Product Overview

Category

The HIP4080AIBZT belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power management applications.

Characteristics

  • High voltage capability
  • Fast switching speed
  • Low power consumption
  • Integrated protection features

Package

The HIP4080AIBZT is available in a small outline package (SOIC) with 20 pins.

Essence

The essence of the HIP4080AIBZT lies in its ability to efficiently control and drive high-power devices, such as MOSFETs and IGBTs.

Packaging/Quantity

The HIP4080AIBZT is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 8V to 15V
  • Output Current: Up to 2.5A
  • Operating Temperature Range: -40°C to +85°C
  • Input Logic Compatibility: CMOS/TTL

Detailed Pin Configuration

  1. VDD - Power supply voltage
  2. VSS - Ground reference
  3. IN1 - Input signal 1
  4. IN2 - Input signal 2
  5. IN3 - Input signal 3
  6. IN4 - Input signal 4
  7. LO1 - Low-side output 1
  8. LO2 - Low-side output 2
  9. LO3 - Low-side output 3
  10. LO4 - Low-side output 4
  11. HO1 - High-side output 1
  12. HO2 - High-side output 2
  13. HO3 - High-side output 3
  14. HO4 - High-side output 4
  15. VBOOT - Bootstrap voltage supply
  16. VREF - Reference voltage
  17. VDD - Power supply voltage
  18. VSS - Ground reference
  19. NC - No connection
  20. NC - No connection

Functional Features

  • Four independent half-bridge outputs
  • Integrated bootstrap diodes
  • Adaptive shoot-through protection
  • Adjustable dead-time control
  • Fault status indication

Advantages and Disadvantages

Advantages

  • High voltage capability allows for driving of power devices in various applications.
  • Fast switching speed enables efficient power conversion.
  • Low power consumption contributes to energy efficiency.
  • Integrated protection features enhance system reliability.

Disadvantages

  • Limited output current may restrict usage in high-power applications.
  • Complex pin configuration requires careful circuit design and layout considerations.

Working Principles

The HIP4080AIBZT operates by receiving input signals and generating corresponding output signals to drive high-power devices. It utilizes adaptive shoot-through protection and adjustable dead-time control to prevent short circuits and optimize switching performance. The integrated bootstrap diodes simplify the driving circuitry, while fault status indication enhances system diagnostics.

Detailed Application Field Plans

The HIP4080AIBZT finds extensive application in various fields, including: 1. Motor control systems 2. Switch-mode power supplies 3. LED lighting drivers 4. Solar inverters 5. Uninterruptible power supplies (UPS) 6. Electric vehicle charging systems

Detailed and Complete Alternative Models

  1. HIP4081AIBZT
  2. IR2104S
  3. LM5109BQ
  4. MAX15062
  5. TC4427EOA

These alternative models offer similar functionalities and can be considered as substitutes for the HIP4080AIBZT in different applications.

Word count: 503 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van HIP4080AIBZT in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of HIP4080AIBZT in technical solutions:

  1. Q: What is HIP4080AIBZT? A: HIP4080AIBZT is a high-frequency, medium-voltage Full Bridge FET driver IC designed for applications such as motor control, power supplies, and inverters.

  2. Q: What is the maximum voltage rating of HIP4080AIBZT? A: The maximum voltage rating of HIP4080AIBZT is typically around 80V.

  3. Q: Can HIP4080AIBZT drive both N-channel and P-channel MOSFETs? A: Yes, HIP4080AIBZT can drive both N-channel and P-channel MOSFETs, making it suitable for full-bridge or half-bridge configurations.

  4. Q: What is the maximum switching frequency supported by HIP4080AIBZT? A: HIP4080AIBZT supports a maximum switching frequency of up to 1 MHz.

  5. Q: Does HIP4080AIBZT have built-in protection features? A: Yes, HIP4080AIBZT includes various protection features like shoot-through prevention, under-voltage lockout (UVLO), and thermal shutdown.

  6. Q: How many independent inputs does HIP4080AIBZT have? A: HIP4080AIBZT has four independent inputs, allowing for precise control of each MOSFET.

  7. Q: Can HIP4080AIBZT operate with a wide range of input voltages? A: Yes, HIP4080AIBZT can operate with input voltages ranging from 10V to 15V.

  8. Q: What is the typical output current capability of HIP4080AIBZT? A: The typical output current capability of HIP4080AIBZT is around 2A.

  9. Q: Is HIP4080AIBZT compatible with microcontrollers and digital signal processors (DSPs)? A: Yes, HIP4080AIBZT can be easily interfaced with microcontrollers and DSPs using its logic-level inputs.

  10. Q: Can HIP4080AIBZT be used in automotive applications? A: Yes, HIP4080AIBZT is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.