Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
EL5167IW-T7

EL5167IW-T7

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: High-speed, low-power, rail-to-rail output
  • Package: SOT-23-5
  • Essence: Single supply operational amplifier
  • Packaging/Quantity: Tape and Reel / 3000 units per reel

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 100MHz (typical)
  • Slew Rate: 50V/µs (typical)
  • Quiescent Current: 1.6mA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The EL5167IW-T7 IC has a total of 5 pins arranged as follows:

  1. Pin 1: V-
  2. Pin 2: IN-
  3. Pin 3: OUT
  4. Pin 4: IN+
  5. Pin 5: V+

Functional Features

  • Rail-to-rail output swing
  • Low input offset voltage
  • High gain bandwidth product
  • Low quiescent current
  • Wide operating temperature range

Advantages and Disadvantages

Advantages: - High-speed performance - Low power consumption - Suitable for single supply applications - Can operate in extreme temperature conditions

Disadvantages: - Limited number of pins for additional functionalities - May require external components for specific applications

Working Principles

The EL5167IW-T7 is a single supply operational amplifier designed for high-speed amplification of signals. It operates on a wide range of supply voltages, making it suitable for various applications. The rail-to-rail output swing allows for maximum utilization of the available supply voltage range. The low input offset voltage ensures accurate amplification of small signals. The high gain bandwidth product enables the amplifier to handle high-frequency signals effectively. The low quiescent current minimizes power consumption, making it suitable for battery-powered devices.

Detailed Application Field Plans

The EL5167IW-T7 is commonly used in the following applications:

  1. Audio amplification in portable devices
  2. Signal conditioning in sensor interfaces
  3. Active filters and equalizers
  4. Data acquisition systems
  5. Communication systems

Detailed and Complete Alternative Models

  • EL5166IW-T7: Similar specifications with a different pin configuration (SOT-23-5 package)
  • EL5168IW-T7: Higher gain bandwidth product and lower input offset voltage (SOT-23-5 package)
  • EL5169IW-T7: Lower quiescent current and wider operating temperature range (SOT-23-5 package)

(Note: These alternative models are from the same series and have similar characteristics but may differ in specific parameters.)

This concludes the encyclopedia entry for the EL5167IW-T7 integrated circuit amplifier.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van EL5167IW-T7 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of EL5167IW-T7 in technical solutions:

  1. Question: What is EL5167IW-T7?
    Answer: EL5167IW-T7 is a specific model of operational amplifier (op-amp) that is commonly used in various technical solutions.

  2. Question: What are the key features of EL5167IW-T7?
    Answer: Some key features of EL5167IW-T7 include low noise, high bandwidth, low distortion, and rail-to-rail input and output capabilities.

  3. Question: In what applications can EL5167IW-T7 be used?
    Answer: EL5167IW-T7 can be used in a wide range of applications such as audio amplification, sensor signal conditioning, data acquisition systems, and active filters.

  4. Question: What is the power supply voltage range for EL5167IW-T7?
    Answer: The power supply voltage range for EL5167IW-T7 is typically between 2.7V and 5.5V.

  5. Question: What is the maximum output current of EL5167IW-T7?
    Answer: The maximum output current of EL5167IW-T7 is typically around 50mA.

  6. Question: Can EL5167IW-T7 operate with a single power supply?
    Answer: Yes, EL5167IW-T7 can operate with a single power supply, making it suitable for battery-powered applications.

  7. Question: What is the input offset voltage of EL5167IW-T7?
    Answer: The input offset voltage of EL5167IW-T7 is typically very low, which ensures accurate signal amplification.

  8. Question: Does EL5167IW-T7 have built-in protection features?
    Answer: Yes, EL5167IW-T7 has built-in protection features such as thermal shutdown and short-circuit protection.

  9. Question: Can EL5167IW-T7 be used in high-frequency applications?
    Answer: Yes, EL5167IW-T7 has a high bandwidth, making it suitable for high-frequency applications.

  10. Question: Is EL5167IW-T7 available in different package options?
    Answer: Yes, EL5167IW-T7 is available in various package options, including surface mount packages like SOT-23 and MSOP.