Infineon Technologies
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
DD241S12KKHPSA1
Details bekijken DataSheets

DD241S12KKHPSA1 Product Overview

Introduction

DD241S12KKHPSA1 is a high-performance electronic component designed for use in power supply applications. This product belongs to the category of voltage regulators and offers unique characteristics that make it suitable for a wide range of electronic devices.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Power supply applications
  • Characteristics: High performance, precise voltage regulation, low noise
  • Package: TO-220
  • Essence: Ensures stable and reliable power supply
  • Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Input Voltage: 24V
  • Output Voltage: 12V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: TO-220
  • Mounting Type: Through Hole
  • Regulation: ±2%

Detailed Pin Configuration

The DD241S12KKHPSA1 features a standard TO-220 pin configuration with three pins: 1. Input (Vin): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (Vout): Provides the regulated output voltage

Functional Features

  • High Efficiency: The regulator operates with high efficiency, minimizing power loss.
  • Low Dropout Voltage: Ensures stable operation even when the input voltage is close to the output voltage.
  • Short Circuit Protection: Built-in protection mechanism safeguards the device from damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low noise output
  • Compact package size

Disadvantages

  • Limited maximum output current
  • Requires heat sink for high-power applications

Working Principles

The DD241S12KKHPSA1 utilizes a feedback control mechanism to maintain a constant output voltage despite variations in the input voltage and load conditions. It employs a series pass transistor to regulate the output voltage and minimize fluctuations.

Detailed Application Field Plans

This voltage regulator is commonly used in various electronic devices and systems, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Several alternative models with similar specifications and functionalities are available in the market, including: - LM7812 - L78S12CV - UA7812

In conclusion, the DD241S12KKHPSA1 voltage regulator offers precise and reliable voltage regulation for a wide range of electronic applications, making it an essential component in modern electronic design and manufacturing.

Word count: 410

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DD241S12KKHPSA1 in technische oplossingen

  1. What is DD241S12KKHPSA1?

    • DD241S12KKHPSA1 is a high-performance, low-power, surface-mount Schottky diode designed for various technical applications.

  2. What are the key features of DD241S12KKHPSA1?

    • The key features include low forward voltage drop, high current capability, and fast switching speed.

  3. In what technical solutions can DD241S12KKHPSA1 be used?

    • DD241S12KKHPSA1 can be used in power supplies, voltage clamping, reverse polarity protection, and signal processing circuits.

  4. What is the maximum forward voltage of DD241S12KKHPSA1?

    • The maximum forward voltage is typically around 0.5V at a forward current of 1A.

  5. What is the maximum reverse voltage of DD241S12KKHPSA1?

    • The maximum reverse voltage is typically around 40V.

  6. How does DD241S12KKHPSA1 perform in high-frequency applications?

    • DD241S12KKHPSA1 exhibits excellent high-frequency performance due to its fast switching speed.

  7. Can DD241S12KKHPSA1 handle high currents?

    • Yes, DD241S12KKHPSA1 is designed to handle high currents, making it suitable for power supply and rectification applications.

  8. Does DD241S12KKHPSA1 require a heat sink for operation?

    • In most cases, DD241S12KKHPSA1 does not require a heat sink due to its low power dissipation characteristics.

  9. What are the recommended operating temperature ranges for DD241S12KKHPSA1?

    • The recommended operating temperature ranges from -65°C to +125°C, making it suitable for a wide range of environments.

  10. Is DD241S12KKHPSA1 RoHS compliant?

    • Yes, DD241S12KKHPSA1 is RoHS compliant, ensuring environmental friendliness and regulatory compliance.