BCR108SE6327BTSA1

Product Overview

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

Input Voltage Range: 2.5V to 40V
Output Current: 100mA
Low Dropout Voltage: 300mV at 100mA
Low Quiescent Current: 45µA
Package Type: SOT-23
Operating Temperature Range: -40°C to 125°C

Package

The BCR108SE6327BTSA1 is available in a small SOT-23 package, making it suitable for compact electronic designs.

Essence

The essence of this product lies in its ability to provide stable voltage regulation with minimal power loss.

Packaging/Quantity

It is typically supplied in tape and reel packaging, with quantities varying based on manufacturer specifications.

Specifications

Input Voltage Range: 2.5V to 40V
Output Voltage: Adjustable
Output Current: 100mA
Dropout Voltage: 300mV at 100mA
Quiescent Current: 45µA
Package Type: SOT-23
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The BCR108SE6327BTSA1 has three pins: 1. VIN: Input Voltage 2. VOUT: Output Voltage 3. GND: Ground

Functional Features

Voltage Regulation: Provides stable output voltage despite variations in input voltage.
Low Dropout: Minimizes power loss and heat dissipation.
Low Quiescent Current: Ensures minimal current consumption when in standby mode.

Advantages

Small form factor
Wide input voltage range
Low dropout voltage
Low quiescent current

Disadvantages

Limited output current capacity
Sensitive to external noise and fluctuations

Working Principles

The BCR108SE6327BTSA1 utilizes internal circuitry to compare the actual output voltage with a reference voltage and adjusts the output to maintain a constant voltage level. It achieves this by controlling the pass transistor to regulate the output voltage.

Detailed Application Field Plans

Battery-powered devices
Portable electronics
IoT devices
Automotive electronics

Detailed and Complete Alternative Models

LM317
LT1086
ADP3338

This completes the entry for BCR108SE6327BTSA1, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

[Word Count: 388]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van BCR108SE6327BTSA1 in technische oplossingen

What is BCR108SE6327BTSA1?
- BCR108SE6327BTSA1 is a high-voltage, low-dropout linear voltage regulator designed for use in automotive applications.
What is the input voltage range of BCR108SE6327BTSA1?
- The input voltage range of BCR108SE6327BTSA1 is from 4.75V to 40V.
What is the output voltage range of BCR108SE6327BTSA1?
- The output voltage range of BCR108SE6327BTSA1 is from 3.3V to 36V.
What is the maximum output current of BCR108SE6327BTSA1?
- The maximum output current of BCR108SE6327BTSA1 is 150mA.
What are the typical applications of BCR108SE6327BTSA1?
- BCR108SE6327BTSA1 is commonly used in automotive electronics, LED lighting, and other industrial applications where a stable voltage supply is required.
What are the key features of BCR108SE6327BTSA1?
- Some key features of BCR108SE6327BTSA1 include overtemperature protection, short-circuit protection, and reverse polarity protection.
What is the operating temperature range of BCR108SE6327BTSA1?
- The operating temperature range of BCR108SE6327BTSA1 is from -40°C to 150°C.
Is BCR108SE6327BTSA1 suitable for automotive applications?
- Yes, BCR108SE6327BTSA1 is specifically designed for automotive applications and meets the relevant industry standards.
Does BCR108SE6327BTSA1 require any external components for operation?
- BCR108SE6327BTSA1 requires only a small output capacitor for stability, making it easy to integrate into various technical solutions.
Where can I find more detailed technical information about BCR108SE6327BTSA1?
- Detailed technical information about BCR108SE6327BTSA1 can be found in the product datasheet provided by the manufacturer or on their official website.