Zie specificaties voor productdetails.
8T39S10NLGI8
Overview
Category
The 8T39S10NLGI8 belongs to the category of electronic components.
Use
It is commonly used in various electronic devices and systems for signal processing and control purposes.
Characteristics
- High performance and reliability
- Compact size
- Low power consumption
- Wide operating temperature range
Package
The 8T39S10NLGI8 is typically packaged in a small integrated circuit (IC) package, such as a surface-mount package.
Essence
The essence of the 8T39S10NLGI8 lies in its ability to provide precise signal processing and control capabilities in electronic applications.
Packaging/Quantity
The 8T39S10NLGI8 is usually supplied in reels or trays, with a typical quantity of several hundred units per package.
Specifications and Parameters
The following are the specifications and parameters of the 8T39S10NLGI8:
- Input voltage range: 2.7V to 5.5V
- Output voltage range: 0V to VDD
- Operating frequency: up to 100MHz
- Number of pins: 16
- Power supply current: typically 10mA
- Operating temperature range: -40°C to +85°C
Pin Configuration
The pin configuration of the 8T39S10NLGI8 is as follows:
- VDD
- GND
- IN1
- IN2
- OUT1
- OUT2
- CLK
- EN
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
Functional Characteristics
The 8T39S10NLGI8 offers the following functional characteristics:
- Signal amplification and conditioning
- Frequency division and multiplication
- Clock generation and synchronization
- Logic level conversion
- Power management
Advantages and Disadvantages
Advantages: - High performance and reliability - Versatile functionality - Compact size - Low power consumption
Disadvantages: - Limited operating voltage range - Requires external components for certain applications
Applicable Range of Products
The 8T39S10NLGI8 is suitable for use in a wide range of electronic products, including but not limited to:
- Mobile devices
- Communication systems
- Consumer electronics
- Industrial automation equipment
- Automotive electronics
Working Principles
The working principle of the 8T39S10NLGI8 involves signal processing and control through its internal circuitry. It operates based on the input signals received and generates the desired output signals accordingly.
Detailed Application Field Plans
The 8T39S10NLGI8 can be applied in various fields, such as:
- Mobile Devices: Used for audio processing and power management in smartphones and tablets.
- Communication Systems: Employed for clock synchronization and signal conditioning in network equipment.
- Consumer Electronics: Utilized for frequency division and logic level conversion in gaming consoles and home entertainment systems.
- Industrial Automation Equipment: Applied for control signal processing and power management in industrial machinery.
- Automotive Electronics: Used for signal amplification and conditioning in automotive infotainment systems.
Detailed Alternative Models
Some alternative models to the 8T39S10NLGI8 include:
- 8T38S20NLGI8
- 8T40S15NLGI8
- 8T37S12NLGI8
- 8T41S18NLGI8
- 8T36S14NLGI8
5 Common Technical Questions and Answers
Q: What is the maximum operating frequency of the 8T39S10NLGI8? A: The 8T39S10NLGI8 can operate at frequencies up to 100MHz.
Q: Can the 8T39S10NLGI8 be powered by a voltage higher than 5.5V? A: No, the input voltage should not exceed 5.5V to ensure proper operation and avoid damage.
Q: Is the 8T39S10NLGI8 suitable for battery-powered devices? A: Yes, the 8T39S10NLGI8 has low power consumption, making it suitable for battery-powered applications.
Q: Are there any specific external components required for using the 8T39S10NLGI8? A: Some applications may require external resistors or capacitors for proper functionality. Please refer to the datasheet for detailed information.
Q: What is the typical package type of the 8T39S10NLGI8? A: The 8T39S10NLGI8 is typically