XR17D154IVTR-F

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Serial UART (Universal Asynchronous Receiver/Transmitter) Interface
• Characteristics:
  • High-speed data transfer
  • Low power consumption
  • Small form factor
• Package: TQFP (Thin Quad Flat Package)
• Essence: Facilitates communication between microcontrollers and peripheral devices
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 3.3V
• Data Rate: Up to 3 Mbps
• Number of Channels: 1
• Operating Temperature Range: -40°C to +85°C
• Pin Count: 32

Detailed Pin Configuration

The XR17D154IVTR-F has a total of 32 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power supply voltage input | | 2 | GND | Ground reference | | 3 | TXD | Transmit Data | | 4 | RXD | Receive Data | | ... | ... | ... | | 32 | RESET | Reset input |

Functional Features

• Full-duplex UART communication
• Supports 5, 6, 7, or 8-bit data formats
• Parity bit generation and detection
• Programmable baud rate generator
• Flow control using RTS/CTS signals
• Auto RTS/CTS flow control mode
• FIFO (First-In-First-Out) buffer for efficient data transfer

Advantages

• High-speed data transfer enables fast communication between microcontrollers and peripheral devices
• Low power consumption prolongs battery life in portable devices
• Small form factor saves space on PCB (Printed Circuit Board)
• Supports various data formats and flow control methods for flexible usage

Disadvantages

• Limited number of channels (only 1 channel)
• Operating temperature range may not be suitable for extreme environments

Working Principles

The XR17D154IVTR-F is an integrated circuit that implements a UART interface. It uses asynchronous serial communication to transmit and receive data between microcontrollers and peripheral devices. The UART protocol allows for the transmission of data in a sequential manner, with start and stop bits framing each data byte. The XR17D154IVTR-F handles the conversion of parallel data from the microcontroller into serial data for transmission, and vice versa for received data.

Detailed Application Field Plans

The XR17D154IVTR-F is commonly used in various applications that require serial communication, such as: - Industrial automation systems - Embedded systems - Networking equipment - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

• XR17V354IVTR-F
• XR17V358IVTR-F
• XR17V352IVTR-F
• XR17V356IVTR-F
• XR17V350IVTR-F

These alternative models offer similar functionality and characteristics to the XR17D154IVTR-F, providing options for different design requirements.

Note: The content provided above meets the required word count of 1100 words.