Zie specificaties voor productdetails.
ST16C454IJ68-F
Product Overview
Category
The ST16C454IJ68-F belongs to the category of integrated circuits (ICs).
Use
This IC is primarily used for serial communication applications.
Characteristics
- High-speed data transfer capability
- Low power consumption
- Compact size
- Reliable performance
Package
The ST16C454IJ68-F is available in a small outline integrated circuit (SOIC) package.
Essence
This IC is designed to facilitate efficient and reliable serial communication between devices.
Packaging/Quantity
The ST16C454IJ68-F is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Data transfer rate: Up to 1 Mbps
- Operating voltage: 3.3V
- Number of channels: 4
- Interface type: UART (Universal Asynchronous Receiver Transmitter)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
The ST16C454IJ68-F has a total of 68 pins. The pin configuration is as follows:
- VCC
- GND
- TXD0
- RXD0
- CTS0
- RTS0
- TXD1
- RXD1
- CTS1
- RTS1
- TXD2
- RXD2
- CTS2
- RTS2
- TXD3
- RXD3
- CTS3
- RTS3
- INT
- CLKOUT
- SDA
- SCL
- RESET
- IRQ
- A0
- A1
- A2
- A3
- A4
- A5
- A6
- A7
- A8
- A9
- A10
- A11
- A12
- A13
- A14
- A15
- A16
- A17
- A18
- A19
- A20
- A21
- A22
- A23
- A24
- A25
- A26
- A27
- A28
- A29
- A30
- A31
- A32
- A33
- A34
- A35
- A36
- A37
- A38
- A39
- A40
- A41
- A42
- A43
Functional Features
- Full-duplex communication
- Hardware flow control (CTS/RTS)
- Programmable baud rate generator
- FIFO (First-In, First-Out) buffers for efficient data transfer
- Support for multiple UART interfaces
Advantages and Disadvantages
Advantages
- High-speed data transfer capability enables fast communication between devices.
- Low power consumption ensures energy efficiency.
- Compact size allows for easy integration into various electronic systems.
- Reliable performance ensures stable and error-free data transmission.
Disadvantages
- Limited number of channels (4) may not be sufficient for certain applications requiring more simultaneous connections.
- Lack of built-in error detection and correction mechanisms may require additional components or software implementation.
Working Principles
The ST16C454IJ68-F operates based on the principles of UART communication. It receives and transmits data in a serial format using asynchronous signaling. The IC converts parallel data into serial format for transmission and vice versa for reception. It utilizes FIFO buffers to efficiently handle data transfer and implements hardware flow control to prevent data loss or corruption.
Detailed Application Field Plans
The ST16C454IJ68-F finds applications in various fields, including but not limited to: - Industrial automation - Telecommunications - Networking equipment - Embedded systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the ST16C454IJ68-F include: - MAX3100 - SC16C554BIB80 - XR16L788
These alternatives can be considered based on specific requirements and compatibility with the target application.
Word count: 570 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ST16C454IJ68-F in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of ST16C454IJ68-F in technical solutions:
Q: What is the ST16C454IJ68-F? A: The ST16C454IJ68-F is a quad UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides four independent serial communication channels.
Q: What are the key features of the ST16C454IJ68-F? A: The key features of the ST16C454IJ68-F include high-speed data transfer rates, support for various protocols (such as RS-232, RS-422, and RS-485), deep FIFO buffers, and low power consumption.
Q: How can I use the ST16C454IJ68-F in my technical solution? A: The ST16C454IJ68-F can be used to add multiple serial communication channels to your system, enabling data transfer between different devices or components.
Q: What applications can benefit from using the ST16C454IJ68-F? A: The ST16C454IJ68-F is commonly used in applications such as industrial automation, telecommunications, networking equipment, embedded systems, and point-of-sale terminals.
Q: Does the ST16C454IJ68-F support full-duplex communication? A: Yes, the ST16C454IJ68-F supports full-duplex communication, allowing simultaneous transmission and reception of data on each channel.
Q: Can I configure the ST16C454IJ68-F for different baud rates? A: Yes, the ST16C454IJ68-F allows you to configure the baud rate individually for each channel, supporting a wide range of standard baud rates.
Q: Is the ST16C454IJ68-F compatible with different voltage levels? A: Yes, the ST16C454IJ68-F supports both 3.3V and 5V logic levels, making it compatible with a variety of systems.
Q: Can I connect the ST16C454IJ68-F directly to a microcontroller or processor? A: Yes, the ST16C454IJ68-F can be connected directly to a microcontroller or processor using standard serial communication interfaces such as UART or SPI.
Q: Does the ST16C454IJ68-F have any built-in error detection or correction mechanisms? A: Yes, the ST16C454IJ68-F includes features like parity checking, framing error detection, and automatic hardware flow control to ensure reliable data transmission.
Q: Where can I find more information about the ST16C454IJ68-F? A: You can refer to the datasheet and technical documentation provided by the manufacturer for detailed information about the ST16C454IJ68-F, including pin configurations, programming guidelines, and application examples.
Please note that the specific details and answers may vary depending on the actual product documentation and specifications.