Exar Corporation
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
ST16C1551IJ28TR-F
Details bekijken DataSheets

ST16C1551IJ28TR-F

Product Overview

Category

The ST16C1551IJ28TR-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in communication systems and devices for data transmission and reception.

Characteristics

  • High-speed data transfer capability
  • Low power consumption
  • Compact size
  • Reliable performance

Package

The ST16C1551IJ28TR-F is available in a small outline integrated circuit (SOIC) package.

Essence

This IC serves as a key component in enabling efficient and reliable data communication within various electronic systems.

Packaging/Quantity

The ST16C1551IJ28TR-F is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

  • Data transfer rate: Up to 1 Mbps
  • Supply voltage: 3.3V
  • Operating temperature range: -40°C to +85°C
  • Number of channels: 1
  • Interface type: UART (Universal Asynchronous Receiver Transmitter)
  • Package type: SOIC-28

Detailed Pin Configuration

The ST16C1551IJ28TR-F features a total of 28 pins, each serving a specific function. The pin configuration is as follows:

  1. VCC - Power supply voltage
  2. GND - Ground reference
  3. TXD - Transmit data output
  4. RXD - Receive data input
  5. CTS - Clear to send input
  6. RTS - Request to send output
  7. DSR - Data set ready input
  8. DCD - Data carrier detect input
  9. RI - Ring indicator input
  10. INT - Interrupt output
  11. CLK - Clock input
  12. RESET - Reset input 13-20. A0-A7 - Address inputs 21-28. D0-D7 - Data bus

Functional Features

  • Full-duplex data transmission
  • Hardware flow control (CTS/RTS)
  • Modem control signals (DSR/DCD/RI)
  • Interrupt capability (INT)
  • Clock synchronization (CLK)
  • Reset functionality (RESET)

Advantages and Disadvantages

Advantages

  • High-speed data transfer enables efficient communication
  • Low power consumption prolongs battery life in portable devices
  • Compact size allows for integration into space-constrained designs
  • Reliable performance ensures stable data transmission

Disadvantages

  • Limited to a single channel, restricting simultaneous data transfer on multiple channels
  • Requires external components for complete system implementation

Working Principles

The ST16C1551IJ28TR-F operates based on the UART protocol, which facilitates asynchronous serial communication. It receives parallel data from the microcontroller and converts it into serial data for transmission. Similarly, it receives serial data and converts it back into parallel data for the microcontroller to process.

Detailed Application Field Plans

The ST16C1551IJ28TR-F finds application in various fields, including: 1. Telecommunications equipment 2. Industrial automation systems 3. Medical devices 4. Consumer electronics 5. Automotive electronics

Detailed and Complete Alternative Models

  1. ST16C1550IJ28TR-F: Similar to the ST16C1551IJ28TR-F but without interrupt functionality.
  2. ST16C1552IJ28TR-F: Similar to the ST16C1551IJ28TR-F but with two channels for simultaneous data transfer.

These alternative models provide options based on specific requirements and system configurations.

Word count: 531 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van ST16C1551IJ28TR-F in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of ST16C1551IJ28TR-F in technical solutions:

Q1: What is the ST16C1551IJ28TR-F? A1: The ST16C1551IJ28TR-F is a UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides serial communication capabilities in technical solutions.

Q2: What are the key features of the ST16C1551IJ28TR-F? A2: Some key features of the ST16C1551IJ28TR-F include high-speed data transfer rates, multiple UART channels, programmable baud rates, and support for various protocols.

Q3: How many UART channels does the ST16C1551IJ28TR-F support? A3: The ST16C1551IJ28TR-F supports up to 4 UART channels, allowing for simultaneous communication with multiple devices.

Q4: What is the maximum data transfer rate supported by the ST16C1551IJ28TR-F? A4: The ST16C1551IJ28TR-F supports high-speed data transfer rates of up to 1.5 Mbps, making it suitable for applications requiring fast serial communication.

Q5: Can the baud rate be programmed in the ST16C1551IJ28TR-F? A5: Yes, the ST16C1551IJ28TR-F allows for flexible baud rate programming, enabling compatibility with different communication standards and requirements.

Q6: What protocols are supported by the ST16C1551IJ28TR-F? A6: The ST16C1551IJ28TR-F supports various protocols such as RS-232, RS-422, and RS-485, making it versatile for different communication interfaces.

Q7: Is the ST16C1551IJ28TR-F compatible with different microcontrollers? A7: Yes, the ST16C1551IJ28TR-F is designed to be compatible with a wide range of microcontrollers, making it easy to integrate into existing systems.

Q8: Does the ST16C1551IJ28TR-F have any built-in error detection and correction mechanisms? A8: Yes, the ST16C1551IJ28TR-F incorporates error detection and correction features like parity checking and framing error detection to ensure reliable data transmission.

Q9: Can the ST16C1551IJ28TR-F operate in low-power modes? A9: Yes, the ST16C1551IJ28TR-F supports low-power modes, allowing for efficient power management in battery-powered or energy-conscious applications.

Q10: What are some typical applications of the ST16C1551IJ28TR-F? A10: The ST16C1551IJ28TR-F is commonly used in applications such as industrial automation, embedded systems, communication equipment, and automotive electronics, where serial communication is required.

Please note that these questions and answers are general and may vary depending on specific use cases and requirements.